Now Celebrating

45
years of
1972-2017

Unbeatable Service

10kg Shock With Winterclear HALF PRICE (saving £16.00)

Shock - These non stabilised chlorine granules are ideal for shock dosing or regular oxidisation of swimming pool water. However they may be used for routine disinfection. Calcium Hypochlorite with 65% available chlorine. Winterclear - Contains Polyquaternary Ammonium Compounds.
View Chemical Safety Sheets Free Shipping

Download Product Specification PDF

Availability: In stock
£67.00

Free UK Delivery Over £60
UK Mainland Only (Excludes Highlands)
Excludes Hot Tubs & Swimspas except Inflatables

All Prices include VAT

All Swim Shock Chlorine - These non stabilised chlorine granules are ideal for shock dosing or regular oxidisation of swimming pool water. However, they may also be used for routine disinfection.

Application Instructions for Shock Chlorine Granules

  1. Maintain pH levels within the ideal range 7.2 - 7.6. If the level is not in the range, adjust.
  2. Maintain free chlorine residuals routinely in the 1 - 3 mg/l (ppm) range. Shock or oxidising procedures are recommended either weekly or fortnightly with a maximum of 10 mg/l (ppm) for a full shock treatment.
  3. Pre-dissolve the shock chlorine (non stabilised granules) in a clean plastic container at a maximum rate of 100g of product per 2.2 gallons (10 litres) of water. Stir well to ensure shock is fully dissolved. Add the resulting solution to the pool whilst the pump(s) are turned 'on' preferably near the water inlets to aid distribution.
  4. Repeat the dose / application if necessary to achieve the desired level.
  5. After using shock granules, pool water may become temporarily cloudy, so keep the filtration pump running until it clears.
  6. After shock treatment procedures allow the chlorine to drop below 5 ppm before bathing recommences, and in any event wait for at least 30 minutes before bathing recommences.

Daily Dose Rates

       Water Volumes                               To increase chlorine level by

Litres

Gallons

1ppm

5ppm

10ppm

4,545

1,000

7g

35g

70g

11,360

2,500

17g

88g

175g

22,725

5,000

35g

175g

350g

68,175

15,000

105g

525g

1050g

General precautions

Dosing

  • Wear eye and face protection and ensure granules are not blown back into your face.
  • Never mix with any other chemicals including cleaning products and chlorine products, as a dangerous reaction may occur.
  • Do not pour this product into a pool skimmer basket containing chlorine tablets or any other product.
  • When pre-dissolving product always add to water not vice versa.

Handling/Storage

  • Handle products in a well-ventilated area, preferably outdoors.
  • Wash hands after use.
  • Ensure chemicals do not become damp in storage - store in a cool dry place.

Winterclear

This effective copper free algaecide will help prevent the multiplication of most types of algae over the winter.  It also helps prevent staining and scale formation.  This product is compatible with Chlorine, Bromine and Biguanide treated pools.

Application Instructions

  1. Ensure the pool water is clear and free from algae/debris before applying All Swim Winterclear.
  2. Shock dose the pool water using All Swim Shock or All Swim Quick Dissolve Shock to achieve a free  chlorine level of 10ppm.
  3. Gradually pour the required amount of All Swim Winterclear into the pool, whilst the pump(s) are turned 'on' preferably near the water inlets to aid distribution.
  4. Check the pH level and if necessary adjust to achieve the recommended winter pH range of 7.6 - 7.8.
  5. Keep the circulation system running until All Swim Winterclear is thoroughly distributed throughout the pool.
  6. If the winter and spring are mild, it may be necessary to periodically shock dose the pool water with chlorine.  This will help keep the pool clear as the air and water temperature starts to rise.

Winter Dose Rates

       Water Volumes                         

Litres

Gallons

Algae Prevention

4,545

1,000

0.3ltr

11,364

2,500

0.8ltr

22,730

5,000

1.7ltr

45,455

10,000

3.3ltr

68,175

15,000

5.0ltr

General Precautions

Never mix with any other chemicals including cleaning products and chlorine products, as a dangerous reaction may occur.

WaterLink Spin Unit

FREE Water Testing

All Swim can test your pool water free of charge!

Just bring a half litre sample to our Cardiff showroom. We'll use a photometer to analyse the current water balance and then give you a free report detailing any recommended remedial action.

The report details: Bromine/Chlorine, pH, Total Alkalinity, Calcium Hardness, Cyanuric acid, Iron and Copper.

All Swim Shock Chlorine - These non stabilised chlorine granules are ideal for shock dosing or regular oxidisation of swimming pool water. However, they may also be used for routine disinfection.

Application Instructions for Shock Chlorine Granules

  1. Maintain pH levels within the ideal range 7.2 - 7.6. If the level is not in the range, adjust.
  2. Maintain free chlorine residuals routinely in the 1 - 3 mg/l (ppm) range. Shock or oxidising procedures are recommended either weekly or fortnightly with a maximum of 10 mg/l (ppm) for a full shock treatment.
  3. Pre-dissolve the shock chlorine (non stabilised granules) in a clean plastic container at a maximum rate of 100g of product per 2.2 gallons (10 litres) of water. Stir well to ensure shock is fully dissolved. Add the resulting solution to the pool whilst the pump(s) are turned 'on' preferably near the water inlets to aid distribution.
  4. Repeat the dose / application if necessary to achieve the desired level.
  5. After using shock granules, pool water may become temporarily cloudy, so keep the filtration pump running until it clears.
  6. After shock treatment procedures allow the chlorine to drop below 5 ppm before bathing recommences, and in any event wait for at least 30 minutes before bathing recommences.

Daily Dose Rates

       Water Volumes                               To increase chlorine level by

Litres

Gallons

1ppm

5ppm

10ppm

4,545

1,000

7g

35g

70g

11,360

2,500

17g

88g

175g

22,725

5,000

35g

175g

350g

68,175

15,000

105g

525g

1050g

General precautions

Dosing

  • Wear eye and face protection and ensure granules are not blown back into your face.
  • Never mix with any other chemicals including cleaning products and chlorine products, as a dangerous reaction may occur.
  • Do not pour this product into a pool skimmer basket containing chlorine tablets or any other product.
  • When pre-dissolving product always add to water not vice versa.

Handling/Storage

  • Handle products in a well-ventilated area, preferably outdoors.
  • Wash hands after use.
  • Ensure chemicals do not become damp in storage - store in a cool dry place.

Winterclear

This effective copper free algaecide will help prevent the multiplication of most types of algae over the winter.  It also helps prevent staining and scale formation.  This product is compatible with Chlorine, Bromine and Biguanide treated pools.

Application Instructions

  1. Ensure the pool water is clear and free from algae/debris before applying All Swim Winterclear.
  2. Shock dose the pool water using All Swim Shock or All Swim Quick Dissolve Shock to achieve a free  chlorine level of 10ppm.
  3. Gradually pour the required amount of All Swim Winterclear into the pool, whilst the pump(s) are turned 'on' preferably near the water inlets to aid distribution.
  4. Check the pH level and if necessary adjust to achieve the recommended winter pH range of 7.6 - 7.8.
  5. Keep the circulation system running until All Swim Winterclear is thoroughly distributed throughout the pool.
  6. If the winter and spring are mild, it may be necessary to periodically shock dose the pool water with chlorine.  This will help keep the pool clear as the air and water temperature starts to rise.

Winter Dose Rates

       Water Volumes                         

Litres

Gallons

Algae Prevention

4,545

1,000

0.3ltr

11,364

2,500

0.8ltr

22,730

5,000

1.7ltr

45,455

10,000

3.3ltr

68,175

15,000

5.0ltr

General Precautions

Never mix with any other chemicals including cleaning products and chlorine products, as a dangerous reaction may occur.

WaterLink Spin Unit

FREE Water Testing

All Swim can test your pool water free of charge!

Just bring a half litre sample to our Cardiff showroom. We'll use a photometer to analyse the current water balance and then give you a free report detailing any recommended remedial action.

The report details: Bromine/Chlorine, pH, Total Alkalinity, Calcium Hardness, Cyanuric acid, Iron and Copper.

Overview

All Swim Shock Chlorine - These non stabilised chlorine granules are ideal for shock dosing or regular oxidisation of swimming pool water. However, they may also be used for routine disinfection.

Application Instructions for Shock Chlorine Granules

  1. Maintain pH levels within the ideal range 7.2 - 7.6. If the level is not in the range, adjust.
  2. Maintain free chlorine residuals routinely in the 1 - 3 mg/l (ppm) range. Shock or oxidising procedures are recommended either weekly or fortnightly with a maximum of 10 mg/l (ppm) for a full shock treatment.
  3. Pre-dissolve the shock chlorine (non stabilised granules) in a clean plastic container at a maximum rate of 100g of product per 2.2 gallons (10 litres) of water. Stir well to ensure shock is fully dissolved. Add the resulting solution to the pool whilst the pump(s) are turned 'on' preferably near the water inlets to aid distribution.
  4. Repeat the dose / application if necessary to achieve the desired level.
  5. After using shock granules, pool water may become temporarily cloudy, so keep the filtration pump running until it clears.
  6. After shock treatment procedures allow the chlorine to drop below 5 ppm before bathing recommences, and in any event wait for at least 30 minutes before bathing recommences.

Daily Dose Rates

       Water Volumes                               To increase chlorine level by

Litres

Gallons

1ppm

5ppm

10ppm

4,545

1,000

7g

35g

70g

11,360

2,500

17g

88g

175g

22,725

5,000

35g

175g

350g

68,175

15,000

105g

525g

1050g

General precautions

Dosing

  • Wear eye and face protection and ensure granules are not blown back into your face.
  • Never mix with any other chemicals including cleaning products and chlorine products, as a dangerous reaction may occur.
  • Do not pour this product into a pool skimmer basket containing chlorine tablets or any other product.
  • When pre-dissolving product always add to water not vice versa.

Handling/Storage

  • Handle products in a well-ventilated area, preferably outdoors.
  • Wash hands after use.
  • Ensure chemicals do not become damp in storage - store in a cool dry place.

Winterclear

This effective copper free algaecide will help prevent the multiplication of most types of algae over the winter.  It also helps prevent staining and scale formation.  This product is compatible with Chlorine, Bromine and Biguanide treated pools.

Application Instructions

  1. Ensure the pool water is clear and free from algae/debris before applying All Swim Winterclear.
  2. Shock dose the pool water using All Swim Shock or All Swim Quick Dissolve Shock to achieve a free  chlorine level of 10ppm.
  3. Gradually pour the required amount of All Swim Winterclear into the pool, whilst the pump(s) are turned 'on' preferably near the water inlets to aid distribution.
  4. Check the pH level and if necessary adjust to achieve the recommended winter pH range of 7.6 - 7.8.
  5. Keep the circulation system running until All Swim Winterclear is thoroughly distributed throughout the pool.
  6. If the winter and spring are mild, it may be necessary to periodically shock dose the pool water with chlorine.  This will help keep the pool clear as the air and water temperature starts to rise.

Winter Dose Rates

       Water Volumes                         

Litres

Gallons

Algae Prevention

4,545

1,000

0.3ltr

11,364

2,500

0.8ltr

22,730

5,000

1.7ltr

45,455

10,000

3.3ltr

68,175

15,000

5.0ltr

General Precautions

Never mix with any other chemicals including cleaning products and chlorine products, as a dangerous reaction may occur.

WaterLink Spin Unit

FREE Water Testing

All Swim can test your pool water free of charge!

Just bring a half litre sample to our Cardiff showroom. We'll use a photometer to analyse the current water balance and then give you a free report detailing any recommended remedial action.

The report details: Bromine/Chlorine, pH, Total Alkalinity, Calcium Hardness, Cyanuric acid, Iron and Copper.

Customers who bought this item also bought
Sage Pay, Visa, Mastercard, Maestro, Solo, American Express and Delta

Directors: A.J & J.L Veysey | Company registration no: 1061642 | VAT no: GB133 4078 90