Now Celebrating

45
years of
1972-2017

Unbeatable Service

5kg Cyanachlor Stabilised Chlorine Granules With FREE JellyCLEAR Cubes (Worth £4.75)

All Swim Cyanachlor is a Stabilised Chlorine in granular form for sanitising swimming pools, spas and hot tubs. Our stabilised chlorine granules are manufactured with a stabiliser to help prevent the destabilisation and destruction of the chlorine by sunlight and UV rays. Sodium Dichloroisocyanurate. Stabilised Chlorine Granules, 55% available chlorine.
View Chemical Safety Sheets

Download Product Specification PDF

Availability: In stock
£29.00

Free UK Delivery Over £60
UK Mainland Only (Excludes Highlands)
Excludes Hot Tubs & Swimspas except Inflatables

All Prices include VAT

These Cyanachlor stablised chlorine granules are ideal for daily dosing of your swimming pool or spa, to produce free active chlorine which kills bacteria and other potentially harmful organisms. They are rapid dissolving and have minimal impact on pH.

Application Instructions

  1. Maintain pH level within the ideal range of 7.2 - 7.6.  If level is not in this range, adjust.
  2. Maintain free chlorine residuals within the range Pools: 1 - 3mg/l (ppm); Spas:3 - 5mg/l(ppm) *Freshly filled spas require initial shock or start up dose of 50mg/l(ppm) for 1 hour or 20mg/l (ppm) for 2 hours.
  3. This product may be applied directly to pools and spas where temperatures exceed 20 °C. If below this temperature or in doubt pre-dissolve this product in a clean plastic container at a maximum rate of 100g of product per 2.2 gallons (10ltrs) of water. Stir well to ensure product is fully dissolved. Add the resulting solution to the pool or spa whilst the pump(s) are turned 'on' preferably near the water inlets to aid distribution.
  4. Repeat dose application.
  5. It is recommended that you periodically (e.g weekly/fortnightly) shock or oxidise your water, using shock or oxidiser products, to eliminate any excess contamination.
Daily Dose Rates
Water Volumes To increase chlorine level by
1,000 220 2g 6g
4,545 1,000 9g 27g
22,700 5,000 45g 135g
45,450 10,000 90g 270g
68,175 15,000 135g 405g

 

General Precautions

Dosing

  • Wear eye and face protection and ensure granules are not blown back into your face.
  • Never mix with any other chemicals including cleaning products and chlorine products, as a dangerous reaction may occur.
  • When pre-dissolving product always add to water not vice versa.

Handling/Storage

  • Handle products in a well-ventilated area, preferably outdoors.
  • Wash hands after use.
  • Ensure chemicals do not become damp in storage - store in a cool dry place.

JellyCLEAR Cubes

JellyCLEAR Cubes - 2 x 70g JellyCLEAR Cubes are clarifier gel blocks that help the filter remove suspended particles to ensure sparkling pool water.

Application Instructions

  1. Ensure algae is pre-treated (previous 24 hours) to release algae from walls, prior to using JellyCLEAR Cubes. Adjust pH to desired range 7.2-7.6.
  2. Backwash the filter (or clean the cartridge) and then return to the normal filtration setting prior to use.
  3. Peel off the protective plastic film and insert the JellyCLEAR cubes directly into the pump strainer basket OR the skimmer/weir basket (when using via skimmer/weir baskets and to prevent debris attaching to the JellyCLEAR cubes, optional use of protective filter socks fitted over - i.e. on top of the cubes, can provide a cosmetic improvement).
  4. JellyCLEAR Cubes will dissolve over a period of 3 - 4 days depending on the water flow from the filtration cycle. However, this duration cycle is not significant as the active ingredients have a long lasting residual effect beyond their disappearance.

General precautions

Dosing

Never mix with any other chemicals inluding cleaning products and chlorine products, as a dangerous reaction may occur.

Handling/Storage

  • Handle products in a well-ventilated area, preferably outdoors.
  • Wash hands after use.
  • Ensure chemicals do not become damp in storage - store in a cool dry place.  Ensure unused Cubes are stored away from the pool and surrounding area as they can otherwise create a slip hazard.

Safety

Although this product is not classified as hazardous the following precautions should apply:

  • Keep locked up and out of reach of children.
  • If swallowed, seek medical advice immediately and show the container or label.
WaterLink Spin Unit

FREE Water Testing

All Swim can test your pool water free of charge!

Just bring a half litre sample to our Cardiff showroom. We'll use a photometer to analyse the current water balance and then give you a free report detailing any recommended remedial action.

The report details: Bromine/Chlorine, pH, Total Alkalinity, Calcium Hardness, Cyanuric acid, Iron and Copper.

These Cyanachlor stablised chlorine granules are ideal for daily dosing of your swimming pool or spa, to produce free active chlorine which kills bacteria and other potentially harmful organisms. They are rapid dissolving and have minimal impact on pH.

Application Instructions

  1. Maintain pH level within the ideal range of 7.2 - 7.6.  If level is not in this range, adjust.
  2. Maintain free chlorine residuals within the range Pools: 1 - 3mg/l (ppm); Spas:3 - 5mg/l(ppm) *Freshly filled spas require initial shock or start up dose of 50mg/l(ppm) for 1 hour or 20mg/l (ppm) for 2 hours.
  3. This product may be applied directly to pools and spas where temperatures exceed 20 °C. If below this temperature or in doubt pre-dissolve this product in a clean plastic container at a maximum rate of 100g of product per 2.2 gallons (10ltrs) of water. Stir well to ensure product is fully dissolved. Add the resulting solution to the pool or spa whilst the pump(s) are turned 'on' preferably near the water inlets to aid distribution.
  4. Repeat dose application.
  5. It is recommended that you periodically (e.g weekly/fortnightly) shock or oxidise your water, using shock or oxidiser products, to eliminate any excess contamination.
Daily Dose Rates
Water Volumes To increase chlorine level by
1,000 220 2g 6g
4,545 1,000 9g 27g
22,700 5,000 45g 135g
45,450 10,000 90g 270g
68,175 15,000 135g 405g

 

General Precautions

Dosing

  • Wear eye and face protection and ensure granules are not blown back into your face.
  • Never mix with any other chemicals including cleaning products and chlorine products, as a dangerous reaction may occur.
  • When pre-dissolving product always add to water not vice versa.

Handling/Storage

  • Handle products in a well-ventilated area, preferably outdoors.
  • Wash hands after use.
  • Ensure chemicals do not become damp in storage - store in a cool dry place.

JellyCLEAR Cubes

JellyCLEAR Cubes - 2 x 70g JellyCLEAR Cubes are clarifier gel blocks that help the filter remove suspended particles to ensure sparkling pool water.

Application Instructions

  1. Ensure algae is pre-treated (previous 24 hours) to release algae from walls, prior to using JellyCLEAR Cubes. Adjust pH to desired range 7.2-7.6.
  2. Backwash the filter (or clean the cartridge) and then return to the normal filtration setting prior to use.
  3. Peel off the protective plastic film and insert the JellyCLEAR cubes directly into the pump strainer basket OR the skimmer/weir basket (when using via skimmer/weir baskets and to prevent debris attaching to the JellyCLEAR cubes, optional use of protective filter socks fitted over - i.e. on top of the cubes, can provide a cosmetic improvement).
  4. JellyCLEAR Cubes will dissolve over a period of 3 - 4 days depending on the water flow from the filtration cycle. However, this duration cycle is not significant as the active ingredients have a long lasting residual effect beyond their disappearance.

General precautions

Dosing

Never mix with any other chemicals inluding cleaning products and chlorine products, as a dangerous reaction may occur.

Handling/Storage

  • Handle products in a well-ventilated area, preferably outdoors.
  • Wash hands after use.
  • Ensure chemicals do not become damp in storage - store in a cool dry place.  Ensure unused Cubes are stored away from the pool and surrounding area as they can otherwise create a slip hazard.

Safety

Although this product is not classified as hazardous the following precautions should apply:

  • Keep locked up and out of reach of children.
  • If swallowed, seek medical advice immediately and show the container or label.
WaterLink Spin Unit

FREE Water Testing

All Swim can test your pool water free of charge!

Just bring a half litre sample to our Cardiff showroom. We'll use a photometer to analyse the current water balance and then give you a free report detailing any recommended remedial action.

The report details: Bromine/Chlorine, pH, Total Alkalinity, Calcium Hardness, Cyanuric acid, Iron and Copper.

Overview

These Cyanachlor stablised chlorine granules are ideal for daily dosing of your swimming pool or spa, to produce free active chlorine which kills bacteria and other potentially harmful organisms. They are rapid dissolving and have minimal impact on pH.

Application Instructions

  1. Maintain pH level within the ideal range of 7.2 - 7.6.  If level is not in this range, adjust.
  2. Maintain free chlorine residuals within the range Pools: 1 - 3mg/l (ppm); Spas:3 - 5mg/l(ppm) *Freshly filled spas require initial shock or start up dose of 50mg/l(ppm) for 1 hour or 20mg/l (ppm) for 2 hours.
  3. This product may be applied directly to pools and spas where temperatures exceed 20 °C. If below this temperature or in doubt pre-dissolve this product in a clean plastic container at a maximum rate of 100g of product per 2.2 gallons (10ltrs) of water. Stir well to ensure product is fully dissolved. Add the resulting solution to the pool or spa whilst the pump(s) are turned 'on' preferably near the water inlets to aid distribution.
  4. Repeat dose application.
  5. It is recommended that you periodically (e.g weekly/fortnightly) shock or oxidise your water, using shock or oxidiser products, to eliminate any excess contamination.
Daily Dose Rates
Water Volumes To increase chlorine level by
1,000 220 2g 6g
4,545 1,000 9g 27g
22,700 5,000 45g 135g
45,450 10,000 90g 270g
68,175 15,000 135g 405g

 

General Precautions

Dosing

  • Wear eye and face protection and ensure granules are not blown back into your face.
  • Never mix with any other chemicals including cleaning products and chlorine products, as a dangerous reaction may occur.
  • When pre-dissolving product always add to water not vice versa.

Handling/Storage

  • Handle products in a well-ventilated area, preferably outdoors.
  • Wash hands after use.
  • Ensure chemicals do not become damp in storage - store in a cool dry place.

JellyCLEAR Cubes

JellyCLEAR Cubes - 2 x 70g JellyCLEAR Cubes are clarifier gel blocks that help the filter remove suspended particles to ensure sparkling pool water.

Application Instructions

  1. Ensure algae is pre-treated (previous 24 hours) to release algae from walls, prior to using JellyCLEAR Cubes. Adjust pH to desired range 7.2-7.6.
  2. Backwash the filter (or clean the cartridge) and then return to the normal filtration setting prior to use.
  3. Peel off the protective plastic film and insert the JellyCLEAR cubes directly into the pump strainer basket OR the skimmer/weir basket (when using via skimmer/weir baskets and to prevent debris attaching to the JellyCLEAR cubes, optional use of protective filter socks fitted over - i.e. on top of the cubes, can provide a cosmetic improvement).
  4. JellyCLEAR Cubes will dissolve over a period of 3 - 4 days depending on the water flow from the filtration cycle. However, this duration cycle is not significant as the active ingredients have a long lasting residual effect beyond their disappearance.

General precautions

Dosing

Never mix with any other chemicals inluding cleaning products and chlorine products, as a dangerous reaction may occur.

Handling/Storage

  • Handle products in a well-ventilated area, preferably outdoors.
  • Wash hands after use.
  • Ensure chemicals do not become damp in storage - store in a cool dry place.  Ensure unused Cubes are stored away from the pool and surrounding area as they can otherwise create a slip hazard.

Safety

Although this product is not classified as hazardous the following precautions should apply:

  • Keep locked up and out of reach of children.
  • If swallowed, seek medical advice immediately and show the container or label.
WaterLink Spin Unit

FREE Water Testing

All Swim can test your pool water free of charge!

Just bring a half litre sample to our Cardiff showroom. We'll use a photometer to analyse the current water balance and then give you a free report detailing any recommended remedial action.

The report details: Bromine/Chlorine, pH, Total Alkalinity, Calcium Hardness, Cyanuric acid, Iron and Copper.

Sage Pay, Visa, Mastercard, Maestro, Solo, American Express and Delta

Directors: A.J & J.L Veysey | Company registration no: 1061642 | VAT no: GB133 4078 90