Now Celebrating

45
years of
1972-2017

Unbeatable Service

ALL SWIM Conditioner (Stabiliser Cyanuric Acid)

ALL SWIM Conditioner (Stabiliser) 2kg (Cyanuric Acid) pool stabiliser, used to reduce Chlorine loss by sunlight in outdoor pools.
View Chemical Safety Sheets

Download Product Specification PDF

Availability: In stock
£14.00

Free UK Delivery Over £60
UK Mainland Only (Excludes Highlands)
Excludes Hot Tubs & Swimspas except Inflatables

All Prices include VAT

Pool stabiliser is best added to pool water on first fill, or on emptying and refilling, or when substantial fresh water has been added after backwashing or heavy rainfall. It is used to reduce Chlorine loss to sunlight and is especially effective on outdoor pools. Pools treated with Stabilised Chlorine (e.g Cyanachlor, Chlorine Tablets) should be dosed at 30mg/l (ppm), whilst pools treated with Non-Stabilised Chlorines (e.g Calcium Hypochlorite/Shock) should be dosed at 60mg/l (ppm).

Application Instructions
1. Maintain pH level within the ideal range of 7.2 - 7.6.  If not in this range, adjust.
2. Test the stabiliser (cyanuric acid) level before aiming for the ideal dose of 30 - 60 mg/l(ppm).
3. Backwash your filter prior to application.
4. Pre-dissolve this product in a clean plastic container at a maximum rate of 100g of product per 2.2 gallons (10 litres) in warm water.  Stir well to ensure product is fully dissolved. Add the resulting solution to the pool or spa whilst the pump(s) are turned 'on' preferably near the water inlets to aid distribution.
5. Repeat dose application if necessary to achieve levels in point 2 above.

Daily Dose Rates
Water Volumes To increase Stabiliser level by
Litres Gallons

10mg/(ppm)

30mg/(ppm)
1,000 220 10g 30g
4,545 1,000 45g 135g
22,700 5,000 225g 675g
45,450 10,000 450g 1.35kg
68,175 15,000 675g 2.025kg

 

General Precautions

Dosing

  • Wear eye and face protection and ensure granules are not blown back into your face.
  • Never mix with any other chemicals including cleaning products and chlorine products, as a dangerous reaction may occur.
  • When pre-dissolving product always add to water not vice versa.

Handling/Storage

  • Handle products in a well-ventilated area, preferably outdoors.
  • Wash hands after use.
  • Ensure chemicals do not become damp in storage - store in a cool dry place.
WaterLink Spin Unit

FREE Water Testing

All Swim can test your pool water free of charge!

Just bring a half litre sample to our Cardiff showroom. We'll use a photometer to analyse the current water balance and then give you a free report detailing any recommended remedial action.

The report details: Bromine/Chlorine, pH, Total Alkalinity, Calcium Hardness, Cyanuric acid, Iron and Copper.

Pool stabiliser is best added to pool water on first fill, or on emptying and refilling, or when substantial fresh water has been added after backwashing or heavy rainfall. It is used to reduce Chlorine loss to sunlight and is especially effective on outdoor pools. Pools treated with Stabilised Chlorine (e.g Cyanachlor, Chlorine Tablets) should be dosed at 30mg/l (ppm), whilst pools treated with Non-Stabilised Chlorines (e.g Calcium Hypochlorite/Shock) should be dosed at 60mg/l (ppm).

Application Instructions
1. Maintain pH level within the ideal range of 7.2 - 7.6.  If not in this range, adjust.
2. Test the stabiliser (cyanuric acid) level before aiming for the ideal dose of 30 - 60 mg/l(ppm).
3. Backwash your filter prior to application.
4. Pre-dissolve this product in a clean plastic container at a maximum rate of 100g of product per 2.2 gallons (10 litres) in warm water.  Stir well to ensure product is fully dissolved. Add the resulting solution to the pool or spa whilst the pump(s) are turned 'on' preferably near the water inlets to aid distribution.
5. Repeat dose application if necessary to achieve levels in point 2 above.

Daily Dose Rates
Water Volumes To increase Stabiliser level by
Litres Gallons

10mg/(ppm)

30mg/(ppm)
1,000 220 10g 30g
4,545 1,000 45g 135g
22,700 5,000 225g 675g
45,450 10,000 450g 1.35kg
68,175 15,000 675g 2.025kg

 

General Precautions

Dosing

  • Wear eye and face protection and ensure granules are not blown back into your face.
  • Never mix with any other chemicals including cleaning products and chlorine products, as a dangerous reaction may occur.
  • When pre-dissolving product always add to water not vice versa.

Handling/Storage

  • Handle products in a well-ventilated area, preferably outdoors.
  • Wash hands after use.
  • Ensure chemicals do not become damp in storage - store in a cool dry place.
WaterLink Spin Unit

FREE Water Testing

All Swim can test your pool water free of charge!

Just bring a half litre sample to our Cardiff showroom. We'll use a photometer to analyse the current water balance and then give you a free report detailing any recommended remedial action.

The report details: Bromine/Chlorine, pH, Total Alkalinity, Calcium Hardness, Cyanuric acid, Iron and Copper.

Overview

Pool stabiliser is best added to pool water on first fill, or on emptying and refilling, or when substantial fresh water has been added after backwashing or heavy rainfall. It is used to reduce Chlorine loss to sunlight and is especially effective on outdoor pools. Pools treated with Stabilised Chlorine (e.g Cyanachlor, Chlorine Tablets) should be dosed at 30mg/l (ppm), whilst pools treated with Non-Stabilised Chlorines (e.g Calcium Hypochlorite/Shock) should be dosed at 60mg/l (ppm).

Application Instructions
1. Maintain pH level within the ideal range of 7.2 - 7.6.  If not in this range, adjust.
2. Test the stabiliser (cyanuric acid) level before aiming for the ideal dose of 30 - 60 mg/l(ppm).
3. Backwash your filter prior to application.
4. Pre-dissolve this product in a clean plastic container at a maximum rate of 100g of product per 2.2 gallons (10 litres) in warm water.  Stir well to ensure product is fully dissolved. Add the resulting solution to the pool or spa whilst the pump(s) are turned 'on' preferably near the water inlets to aid distribution.
5. Repeat dose application if necessary to achieve levels in point 2 above.

Daily Dose Rates
Water Volumes To increase Stabiliser level by
Litres Gallons

10mg/(ppm)

30mg/(ppm)
1,000 220 10g 30g
4,545 1,000 45g 135g
22,700 5,000 225g 675g
45,450 10,000 450g 1.35kg
68,175 15,000 675g 2.025kg

 

General Precautions

Dosing

  • Wear eye and face protection and ensure granules are not blown back into your face.
  • Never mix with any other chemicals including cleaning products and chlorine products, as a dangerous reaction may occur.
  • When pre-dissolving product always add to water not vice versa.

Handling/Storage

  • Handle products in a well-ventilated area, preferably outdoors.
  • Wash hands after use.
  • Ensure chemicals do not become damp in storage - store in a cool dry place.
WaterLink Spin Unit

FREE Water Testing

All Swim can test your pool water free of charge!

Just bring a half litre sample to our Cardiff showroom. We'll use a photometer to analyse the current water balance and then give you a free report detailing any recommended remedial action.

The report details: Bromine/Chlorine, pH, Total Alkalinity, Calcium Hardness, Cyanuric acid, Iron and Copper.

Sage Pay, Visa, Mastercard, Maestro, Solo, American Express and Delta

Directors: A.J & J.L Veysey | Company registration no: 1061642 | VAT no: GB133 4078 90