Now Celebrating

45
years of
1972-2017

Unbeatable Service

ALL SWIM PAK 1 Bicarbonate Of Soda TA Plus (Raises Total Alkalinity)

(Bicarbonate of Soda) Raises Total Alkalinity.
View Chemical Safety Sheets

Download Product Specification PDF

Availability: In stock
£16.50
*

Free UK Delivery Over £60
UK Mainland Only (Excludes Highlands)
Excludes Hot Tubs & Swimspas except Inflatables

All Prices include VAT

Low total alkalinity (TA) may cause pool water to be corrosive and the pH level difficult to maintain. Total alkalinity should be maintained at between 80 - 150mg/l (ppm). Test the total alkalinity level of the pool water and if it is below 80mg/l (ppm) use Pak 1 to increase the level.

Application Instructions
1.
Pre-dissolve the product in a clean plastic container at a maximum rate of 100g of product per 2.2 gallons (10lts) of clean water.  Stir well to ensure product is fully dissolved.  Add the resulting solution to the pool whilst the pump(s) are turned "on", preferably near to the water inlets to aid distribution.
2. The total amount of TA Raiser can be applied in one application.

Water volumes Dose Rates
Litres Gallons  To increase total alkilinity by 10mg/l(ppm) To increase total alkilinity by 25mg/l(ppm)
4,545 1,000 81g 203g
9,090 2,000 162g 405g
22,700 5,000 405g 1.01kg
45,450 10,000 810g 2.02kg
68,175 15,000 1.21kg 3.03kg

 

General Precautions

Dosing

  • Wear eye and face protection and ensure granules are not blown back into your face.
  • Never mix with other chemicals including household cleaners as a dangerous reaction may occur.
  • When pre-dissolving always add product to water and not vice versa.

Handling/Storage

  • Handle products in a well ventilated area - preferably outdoors.
  • Wash hands after use.
  • Ensure chemicals do not become damp in storage - store in a cool dry place.
WaterLink Spin Unit

FREE Water Testing

All Swim can test your pool water free of charge!

Just bring a half litre sample to our Cardiff showroom. We'll use a photometer to analyse the current water balance and then give you a free report detailing any recommended remedial action.

The report details: Bromine/Chlorine, pH, Total Alkalinity, Calcium Hardness, Cyanuric acid, Iron and Copper.

Low total alkalinity (TA) may cause pool water to be corrosive and the pH level difficult to maintain. Total alkalinity should be maintained at between 80 - 150mg/l (ppm). Test the total alkalinity level of the pool water and if it is below 80mg/l (ppm) use Pak 1 to increase the level.

Application Instructions
1.
Pre-dissolve the product in a clean plastic container at a maximum rate of 100g of product per 2.2 gallons (10lts) of clean water.  Stir well to ensure product is fully dissolved.  Add the resulting solution to the pool whilst the pump(s) are turned "on", preferably near to the water inlets to aid distribution.
2. The total amount of TA Raiser can be applied in one application.

Water volumes Dose Rates
Litres Gallons  To increase total alkilinity by 10mg/l(ppm) To increase total alkilinity by 25mg/l(ppm)
4,545 1,000 81g 203g
9,090 2,000 162g 405g
22,700 5,000 405g 1.01kg
45,450 10,000 810g 2.02kg
68,175 15,000 1.21kg 3.03kg

 

General Precautions

Dosing

  • Wear eye and face protection and ensure granules are not blown back into your face.
  • Never mix with other chemicals including household cleaners as a dangerous reaction may occur.
  • When pre-dissolving always add product to water and not vice versa.

Handling/Storage

  • Handle products in a well ventilated area - preferably outdoors.
  • Wash hands after use.
  • Ensure chemicals do not become damp in storage - store in a cool dry place.
WaterLink Spin Unit

FREE Water Testing

All Swim can test your pool water free of charge!

Just bring a half litre sample to our Cardiff showroom. We'll use a photometer to analyse the current water balance and then give you a free report detailing any recommended remedial action.

The report details: Bromine/Chlorine, pH, Total Alkalinity, Calcium Hardness, Cyanuric acid, Iron and Copper.

Overview

Low total alkalinity (TA) may cause pool water to be corrosive and the pH level difficult to maintain. Total alkalinity should be maintained at between 80 - 150mg/l (ppm). Test the total alkalinity level of the pool water and if it is below 80mg/l (ppm) use Pak 1 to increase the level.

Application Instructions
1.
Pre-dissolve the product in a clean plastic container at a maximum rate of 100g of product per 2.2 gallons (10lts) of clean water.  Stir well to ensure product is fully dissolved.  Add the resulting solution to the pool whilst the pump(s) are turned "on", preferably near to the water inlets to aid distribution.
2. The total amount of TA Raiser can be applied in one application.

Water volumes Dose Rates
Litres Gallons  To increase total alkilinity by 10mg/l(ppm) To increase total alkilinity by 25mg/l(ppm)
4,545 1,000 81g 203g
9,090 2,000 162g 405g
22,700 5,000 405g 1.01kg
45,450 10,000 810g 2.02kg
68,175 15,000 1.21kg 3.03kg

 

General Precautions

Dosing

  • Wear eye and face protection and ensure granules are not blown back into your face.
  • Never mix with other chemicals including household cleaners as a dangerous reaction may occur.
  • When pre-dissolving always add product to water and not vice versa.

Handling/Storage

  • Handle products in a well ventilated area - preferably outdoors.
  • Wash hands after use.
  • Ensure chemicals do not become damp in storage - store in a cool dry place.
WaterLink Spin Unit

FREE Water Testing

All Swim can test your pool water free of charge!

Just bring a half litre sample to our Cardiff showroom. We'll use a photometer to analyse the current water balance and then give you a free report detailing any recommended remedial action.

The report details: Bromine/Chlorine, pH, Total Alkalinity, Calcium Hardness, Cyanuric acid, Iron and Copper.

Sage Pay, Visa, Mastercard, Maestro, Solo, American Express and Delta

Directors: A.J & J.L Veysey | Company registration no: 1061642 | VAT no: GB133 4078 90