Lo-Chlor Maxi-Floc Plus

Lo-Chlor Maxi-Floc Plus 1 Litre is a heavy duty, fast acting liquid flocculant which will clear the cloudiest of pools.

1 Litre treats up to 50,000 Litres of pool water.


Want to learn about clarifiers and flocculants and which product is best to clear your pool water effectively? Click here for further information
Availability: In stock

£24.00

Free UK Delivery Over £60
UK Mainland Only (Excludes Highlands)
Excludes Hot Tubs & Swimspas except Inflatables

All Prices include VAT

Chemical Dosage Calculator

See how much Lo-Chlor Maxi-Floc Plus to use in our Chemical Dosage Calculator

Lo-Chlor Maxi-Floc Plus 1 Litre is a heavy duty flocculant with built in accelerator that will clear the cloudiest of pools in under 6 hours! The highly concentrated formulation is compatible with all recognised sanitisers, will help remove dead algae and leaves no messy residue in the pool.

1 Litre treats up to 50,000 Litres of pool water.


What Is It?

Lo-Chlor Maxi-Floc Plus is a heavy duty, fast acting liquid flocculant.


Who Needs It?

A pool owner who has an extremely cloudy pool. If you are unable to see the bottom of the pool then this is what you need.

It is the ideal product if you need to get the pool cleared quickly.


What Does It Do?

Lo-Chlor Maxi-Floc Plus will restore clarity to even the cloudiest pool water. Maxi-Floc Plus will restore water clarity in most pools in under 6 hours.

Maxi-Floc Plus may also be used to remove dead algae and other floating particles.


General Precautions


Dosing

  1. Calculate the volume of Maxi-Floc Plus required from the table below
  2. Pre-dilute the product in a clean plastic container
  3. Set the pool filter to RE-CIRCULATE. Where this setting is unavailable, remove the filter cartridges or grids before operating the filter
  4. Adjust the pH to 7.8
  5. Evenly distribute around the pool with the pump and filter running
  6. Run the pump for 1 to 2 hours and turn off
  7. Leave the pool for all residue to settle, usually within six hours
  8. Vacuum to waste
  9. Replace filter cartridges or grids, where necessary
  10. Resume normal filtration and correctly balance the pool water

Water Volume Dose
Gallons Litres
5,500 25,000 500ml
11,000 50,000 1000ml
16,500 75,000 1250ml


What Advantages Does It Have Over Other Similar Products?

  1. Maxi-Floc Plus is the fastest working floc available.
  2. It is extremely heavy duty.
  3. It is easy to use and economical to purchase.
  4. After use, it leaves no messy residue in the pool.
  5. It may be used with all types of pool finishes.
  6. Compatible with all recognised sanitisers and other pool additives.


Professional Tips

  • Make sure the the pH is around 7.8 before adding the product.
  • Alum flocculants only work when the pH is higher.
  • Do not run Maxi-Floc Plus through the filtration system. Use the re-circulate settings where available. Otherwise remove the filter grids prior to application.
  • Ensure that a sufficient dosage rate is recommended as a lesser amount can result in minimal floccing activity.
  • When using Maxi-Floc Plus in water containing high concentrations of positively charged ions (salt pools) be aware that the overall floc size is reduced. This will result in a floc of lighter appearance and intensity than may have been anticipated. Sometimes when floccing salt water pools you may require a second treatment or a double dose.


Handling/Storage

  • Always ensure bathers are out of the swimming pool when adding chemicals. 
  • Never mix with any other chemicals or cleaning products as a dangerous reaction may occur.
  • Read and follow all instructions carefully, dosage instructions are a guide to the most effective use.
  • Always handle products in a well ventilated area.
  • Store in a cool dry secure place.
  • Do not get in eyes, on skin or on clothing.
  • Keep out of the reach of children.
  • This container must not be used ot contaminated with any other materials.
  • Wash out and dispose of the container through an approved facility, the plastic container can be recycled.

Lo-Chlor Maxi-Floc Plus 1 Litre is a heavy duty flocculant with built in accelerator that will clear the cloudiest of pools in under 6 hours! The highly concentrated formulation is compatible with all recognised sanitisers, will help remove dead algae and leaves no messy residue in the pool.

1 Litre treats up to 50,000 Litres of pool water.


What Is It?

Lo-Chlor Maxi-Floc Plus is a heavy duty, fast acting liquid flocculant.


Who Needs It?

A pool owner who has an extremely cloudy pool. If you are unable to see the bottom of the pool then this is what you need.

It is the ideal product if you need to get the pool cleared quickly.


What Does It Do?

Lo-Chlor Maxi-Floc Plus will restore clarity to even the cloudiest pool water. Maxi-Floc Plus will restore water clarity in most pools in under 6 hours.

Maxi-Floc Plus may also be used to remove dead algae and other floating particles.


General Precautions


Dosing

  1. Calculate the volume of Maxi-Floc Plus required from the table below
  2. Pre-dilute the product in a clean plastic container
  3. Set the pool filter to RE-CIRCULATE. Where this setting is unavailable, remove the filter cartridges or grids before operating the filter
  4. Adjust the pH to 7.8
  5. Evenly distribute around the pool with the pump and filter running
  6. Run the pump for 1 to 2 hours and turn off
  7. Leave the pool for all residue to settle, usually within six hours
  8. Vacuum to waste
  9. Replace filter cartridges or grids, where necessary
  10. Resume normal filtration and correctly balance the pool water

Water Volume Dose
Gallons Litres
5,500 25,000 500ml
11,000 50,000 1000ml
16,500 75,000 1250ml


What Advantages Does It Have Over Other Similar Products?

  1. Maxi-Floc Plus is the fastest working floc available.
  2. It is extremely heavy duty.
  3. It is easy to use and economical to purchase.
  4. After use, it leaves no messy residue in the pool.
  5. It may be used with all types of pool finishes.
  6. Compatible with all recognised sanitisers and other pool additives.


Professional Tips

  • Make sure the the pH is around 7.8 before adding the product.
  • Alum flocculants only work when the pH is higher.
  • Do not run Maxi-Floc Plus through the filtration system. Use the re-circulate settings where available. Otherwise remove the filter grids prior to application.
  • Ensure that a sufficient dosage rate is recommended as a lesser amount can result in minimal floccing activity.
  • When using Maxi-Floc Plus in water containing high concentrations of positively charged ions (salt pools) be aware that the overall floc size is reduced. This will result in a floc of lighter appearance and intensity than may have been anticipated. Sometimes when floccing salt water pools you may require a second treatment or a double dose.


Handling/Storage

  • Always ensure bathers are out of the swimming pool when adding chemicals. 
  • Never mix with any other chemicals or cleaning products as a dangerous reaction may occur.
  • Read and follow all instructions carefully, dosage instructions are a guide to the most effective use.
  • Always handle products in a well ventilated area.
  • Store in a cool dry secure place.
  • Do not get in eyes, on skin or on clothing.
  • Keep out of the reach of children.
  • This container must not be used ot contaminated with any other materials.
  • Wash out and dispose of the container through an approved facility, the plastic container can be recycled.



Product tags
2024 All Swim Catalogue
A.J & J.L Veysey | Company registration no: 1061642 | VAT no: GB133 4078 90
All Swim Ltd, Units 3-5 Link Trade Park, Penarth Road, Cardiff CF11 8TQ

Modal