Now Celebrating

46
years of
1972-2018

Unbeatable Service

Lo-Chlor Professional Starver Test Kit

The Lo-Chlor Professional Starver Test Kit is designed to accurately test the level of phosphates in swimming pool and hot tub water.

Download Product Specification PDF

Availability: In stock
£11.50
£11.25

Free UK Delivery Over £60
UK Mainland Only (Excludes Highlands)
Excludes Hot Tubs & Swimspas except Inflatables

All Prices include VAT

Do you have a recurring algae problem in your swimming pool or hot tub? If so, it may be due to an elevated level of phosphates present in the water, which act as a food source for algae.

The Lo-Chlor Professional Starver Test Kit will provide an accurate reading of the level of phosphates, enabling you to take the necessary action to remove them and put a stop to problematic algae growth.

KIT CONTENTS

1 x 25mls Reagent A

1 x 25mls Reagent B

1 x 12mls vial

General Instructions

1. Fill the tube provided with approximately 10mls of pool or spa water.

2. Add 5 drops of Reagent A.

3. Add 5 drops of Reagent B.

4. Replace the cap and shake well.

5. Compare the colour of the sample against the chart provided.

Professional Tips

  • If algae are present in the pool or hot tub water, the test result may read zero.  This is because all the phosphate has been consumed by the algae.  It is therefore essential that prior to testing you ensure all living algae and algae spores have been killed.
  • If the test result is positivie (the colour of the vial has turned blue) but shows a result greater than 1ppm, you will need to carry out the following steps:
  • a. Fill the tube provided with approximately 2mls of water.
  • b. Top up the tube with approximately 8mls of distilled water.
  • c. Add the reagents as per the instructions above.
  • d. Check the result.
  • e. Multiply the result by a factor of four (4x) to give an accurate reading.
  • f. If the phosphate level is above 10ppm you should contact your Lo-Chlor professional for further advice.
  • g. Always store the kits in cool dry conditions.

WaterLink Spin Unit

FREE Water Testing

All Swim can test your pool water free of charge!

Just bring a half litre sample to our Cardiff showroom. We'll use a photometer to analyse the current water balance and then give you a free report detailing any recommended remedial action.

The report details: Bromine/Chlorine, pH, Total Alkalinity, Calcium Hardness, Cyanuric acid, Iron and Copper.

Do you have a recurring algae problem in your swimming pool or hot tub? If so, it may be due to an elevated level of phosphates present in the water, which act as a food source for algae.

The Lo-Chlor Professional Starver Test Kit will provide an accurate reading of the level of phosphates, enabling you to take the necessary action to remove them and put a stop to problematic algae growth.

KIT CONTENTS

1 x 25mls Reagent A

1 x 25mls Reagent B

1 x 12mls vial

General Instructions

1. Fill the tube provided with approximately 10mls of pool or spa water.

2. Add 5 drops of Reagent A.

3. Add 5 drops of Reagent B.

4. Replace the cap and shake well.

5. Compare the colour of the sample against the chart provided.

Professional Tips

  • If algae are present in the pool or hot tub water, the test result may read zero.  This is because all the phosphate has been consumed by the algae.  It is therefore essential that prior to testing you ensure all living algae and algae spores have been killed.
  • If the test result is positivie (the colour of the vial has turned blue) but shows a result greater than 1ppm, you will need to carry out the following steps:
  • a. Fill the tube provided with approximately 2mls of water.
  • b. Top up the tube with approximately 8mls of distilled water.
  • c. Add the reagents as per the instructions above.
  • d. Check the result.
  • e. Multiply the result by a factor of four (4x) to give an accurate reading.
  • f. If the phosphate level is above 10ppm you should contact your Lo-Chlor professional for further advice.
  • g. Always store the kits in cool dry conditions.

WaterLink Spin Unit

FREE Water Testing

All Swim can test your pool water free of charge!

Just bring a half litre sample to our Cardiff showroom. We'll use a photometer to analyse the current water balance and then give you a free report detailing any recommended remedial action.

The report details: Bromine/Chlorine, pH, Total Alkalinity, Calcium Hardness, Cyanuric acid, Iron and Copper.

Overview

Do you have a recurring algae problem in your swimming pool or hot tub? If so, it may be due to an elevated level of phosphates present in the water, which act as a food source for algae.

The Lo-Chlor Professional Starver Test Kit will provide an accurate reading of the level of phosphates, enabling you to take the necessary action to remove them and put a stop to problematic algae growth.

KIT CONTENTS

1 x 25mls Reagent A

1 x 25mls Reagent B

1 x 12mls vial

General Instructions

1. Fill the tube provided with approximately 10mls of pool or spa water.

2. Add 5 drops of Reagent A.

3. Add 5 drops of Reagent B.

4. Replace the cap and shake well.

5. Compare the colour of the sample against the chart provided.

Professional Tips

  • If algae are present in the pool or hot tub water, the test result may read zero.  This is because all the phosphate has been consumed by the algae.  It is therefore essential that prior to testing you ensure all living algae and algae spores have been killed.
  • If the test result is positivie (the colour of the vial has turned blue) but shows a result greater than 1ppm, you will need to carry out the following steps:
  • a. Fill the tube provided with approximately 2mls of water.
  • b. Top up the tube with approximately 8mls of distilled water.
  • c. Add the reagents as per the instructions above.
  • d. Check the result.
  • e. Multiply the result by a factor of four (4x) to give an accurate reading.
  • f. If the phosphate level is above 10ppm you should contact your Lo-Chlor professional for further advice.
  • g. Always store the kits in cool dry conditions.

WaterLink Spin Unit

FREE Water Testing

All Swim can test your pool water free of charge!

Just bring a half litre sample to our Cardiff showroom. We'll use a photometer to analyse the current water balance and then give you a free report detailing any recommended remedial action.

The report details: Bromine/Chlorine, pH, Total Alkalinity, Calcium Hardness, Cyanuric acid, Iron and Copper.

Customers who bought this item also bought
Sage Pay, Visa, Mastercard, Maestro, Solo, American Express and Delta

Directors: A.J & J.L Veysey | Company registration no: 1061642 | VAT no: GB133 4078 90