Now Celebrating

45
years of
1972-2017

Unbeatable Service

Aquasparkle pH Plus Sodium Carbonate (Raises pH)

pH Plus 1kg. Sodium Carbonate Raises pH.
View Chemical Safety Sheets Chemical Safety and Hazard Warning Tips

Download Product Specification PDF

Availability: In stock
£8.00

Free UK Delivery Over £60
UK Mainland Only (Excludes Highlands)
Excludes Hot Tubs & Swimspas except Inflatables

All Prices include VAT

The ideal Spa pH levels are between 7.2 - 7.6, promoting bather comfort, optimum chemical efficiency and protection of spa plant equipment.  Test the pH of your spa water and if it is below 7.2, use Aquasparkle Spa pH Plus to raise it.

Application Instructions

  1. Pre-dissolve the product in a clean plastic container at a maximum rate of 10g of product per 0.2 gallons (1lt) of clean warm water.  Stir well to ensure product is fully dissolved.  Carefully add the resulting solution to the spa whilst the pump(s) are turned "on", preferably near to the water inlets to aid distribution.
  2. After a minimum of 30 minutes, recheck the pH level and if necessary repeat the treatment until the ideal pH is established. Please note a number of treatments may be required.
Water volumes
Litres Gallons Dose rates
1,000 220 11g
1,500 330 17g

 

General Precautions

Dosing

    • Wear eye and face protection and ensure granules are not blown back into your face.
    • Never mix with other chemicals including household cleaners as a dangerous reaction may occur.
    • When pre-dissolving always add product to water and not vice versa.

Handling/Storage

    • Handle products in a well ventilated area - preferably outdoors.
    • Wash hands after use.
    • Ensure chemicals do not become damp in storage - store in a cool dry place.
WaterLink Spin Unit

FREE Water Testing

All Swim can test your pool water free of charge!

Just bring a half litre sample to our Cardiff showroom. We'll use a photometer to analyse the current water balance and then give you a free report detailing any recommended remedial action.

The report details: Bromine/Chlorine, pH, Total Alkalinity, Calcium Hardness, Cyanuric acid, Iron and Copper.

The ideal Spa pH levels are between 7.2 - 7.6, promoting bather comfort, optimum chemical efficiency and protection of spa plant equipment.  Test the pH of your spa water and if it is below 7.2, use Aquasparkle Spa pH Plus to raise it.

Application Instructions

  1. Pre-dissolve the product in a clean plastic container at a maximum rate of 10g of product per 0.2 gallons (1lt) of clean warm water.  Stir well to ensure product is fully dissolved.  Carefully add the resulting solution to the spa whilst the pump(s) are turned "on", preferably near to the water inlets to aid distribution.
  2. After a minimum of 30 minutes, recheck the pH level and if necessary repeat the treatment until the ideal pH is established. Please note a number of treatments may be required.
Water volumes
Litres Gallons Dose rates
1,000 220 11g
1,500 330 17g

 

General Precautions

Dosing

    • Wear eye and face protection and ensure granules are not blown back into your face.
    • Never mix with other chemicals including household cleaners as a dangerous reaction may occur.
    • When pre-dissolving always add product to water and not vice versa.

Handling/Storage

    • Handle products in a well ventilated area - preferably outdoors.
    • Wash hands after use.
    • Ensure chemicals do not become damp in storage - store in a cool dry place.
WaterLink Spin Unit

FREE Water Testing

All Swim can test your pool water free of charge!

Just bring a half litre sample to our Cardiff showroom. We'll use a photometer to analyse the current water balance and then give you a free report detailing any recommended remedial action.

The report details: Bromine/Chlorine, pH, Total Alkalinity, Calcium Hardness, Cyanuric acid, Iron and Copper.

Overview

The ideal Spa pH levels are between 7.2 - 7.6, promoting bather comfort, optimum chemical efficiency and protection of spa plant equipment.  Test the pH of your spa water and if it is below 7.2, use Aquasparkle Spa pH Plus to raise it.

Application Instructions

  1. Pre-dissolve the product in a clean plastic container at a maximum rate of 10g of product per 0.2 gallons (1lt) of clean warm water.  Stir well to ensure product is fully dissolved.  Carefully add the resulting solution to the spa whilst the pump(s) are turned "on", preferably near to the water inlets to aid distribution.
  2. After a minimum of 30 minutes, recheck the pH level and if necessary repeat the treatment until the ideal pH is established. Please note a number of treatments may be required.
Water volumes
Litres Gallons Dose rates
1,000 220 11g
1,500 330 17g

 

General Precautions

Dosing

    • Wear eye and face protection and ensure granules are not blown back into your face.
    • Never mix with other chemicals including household cleaners as a dangerous reaction may occur.
    • When pre-dissolving always add product to water and not vice versa.

Handling/Storage

    • Handle products in a well ventilated area - preferably outdoors.
    • Wash hands after use.
    • Ensure chemicals do not become damp in storage - store in a cool dry place.
WaterLink Spin Unit

FREE Water Testing

All Swim can test your pool water free of charge!

Just bring a half litre sample to our Cardiff showroom. We'll use a photometer to analyse the current water balance and then give you a free report detailing any recommended remedial action.

The report details: Bromine/Chlorine, pH, Total Alkalinity, Calcium Hardness, Cyanuric acid, Iron and Copper.

Sage Pay, Visa, Mastercard, Maestro, Solo, American Express and Delta

Directors: A.J & J.L Veysey | Company registration no: 1061642 | VAT no: GB133 4078 90