Now Celebrating

45
years of
1972-2017

Unbeatable Service

Aquasparkle TA Plus Bicarbonate Of Soda (Raises Total Alkalinity)

TA Plus 1kg. For increasing Total Alkalinity of spa water.
View Chemical Safety Sheets Chemical Safety and Hazard Warning Tips

Download Product Specification PDF

Availability: In stock
£8.25

Free UK Delivery Over £60
UK Mainland Only (Excludes Highlands)
Excludes Hot Tubs & Swimspas except Inflatables

All Prices include VAT

Low total alkalinity (TA) may cause spa water to be corrosive and the pH level difficult to maintain. Total alkalinity should be maintained at between 80 - 150mg/l (ppm). Test the total alkalinity level of the spa water and if it is below 80mg/l (ppm) use Aquasparkle Spa TA Plus to increase the level.

Application Instructions

  1. Pre-dissolve the product in a clean plastic container at a maximum rate of 10g of product per 0.2 gallons (1lt) of clean water. Stir well to ensure product is fully dissolved. Add the resulting solution to the spa whilst the pump(s) are turned "on", preferably near to the water inlets to aid distribution.
  2. The total amount of Spa TA Plus can be applied in one application.

General Precautions

Dosing

  • Wear eye and face protection and ensure granules are not blown back into your face.
  • Never mix with other chemicals including household cleaners as a dangerous reaction may occur.
  • When pre-dissolving always add product to water and not vice versa.
WaterLink Spin Unit

FREE Water Testing

All Swim can test your pool water free of charge!

Just bring a half litre sample to our Cardiff showroom. We'll use a photometer to analyse the current water balance and then give you a free report detailing any recommended remedial action.

The report details: Bromine/Chlorine, pH, Total Alkalinity, Calcium Hardness, Cyanuric acid, Iron and Copper.

Low total alkalinity (TA) may cause spa water to be corrosive and the pH level difficult to maintain. Total alkalinity should be maintained at between 80 - 150mg/l (ppm). Test the total alkalinity level of the spa water and if it is below 80mg/l (ppm) use Aquasparkle Spa TA Plus to increase the level.

Application Instructions

  1. Pre-dissolve the product in a clean plastic container at a maximum rate of 10g of product per 0.2 gallons (1lt) of clean water. Stir well to ensure product is fully dissolved. Add the resulting solution to the spa whilst the pump(s) are turned "on", preferably near to the water inlets to aid distribution.
  2. The total amount of Spa TA Plus can be applied in one application.

General Precautions

Dosing

  • Wear eye and face protection and ensure granules are not blown back into your face.
  • Never mix with other chemicals including household cleaners as a dangerous reaction may occur.
  • When pre-dissolving always add product to water and not vice versa.
WaterLink Spin Unit

FREE Water Testing

All Swim can test your pool water free of charge!

Just bring a half litre sample to our Cardiff showroom. We'll use a photometer to analyse the current water balance and then give you a free report detailing any recommended remedial action.

The report details: Bromine/Chlorine, pH, Total Alkalinity, Calcium Hardness, Cyanuric acid, Iron and Copper.

Overview

Low total alkalinity (TA) may cause spa water to be corrosive and the pH level difficult to maintain. Total alkalinity should be maintained at between 80 - 150mg/l (ppm). Test the total alkalinity level of the spa water and if it is below 80mg/l (ppm) use Aquasparkle Spa TA Plus to increase the level.

Application Instructions

  1. Pre-dissolve the product in a clean plastic container at a maximum rate of 10g of product per 0.2 gallons (1lt) of clean water. Stir well to ensure product is fully dissolved. Add the resulting solution to the spa whilst the pump(s) are turned "on", preferably near to the water inlets to aid distribution.
  2. The total amount of Spa TA Plus can be applied in one application.

General Precautions

Dosing

  • Wear eye and face protection and ensure granules are not blown back into your face.
  • Never mix with other chemicals including household cleaners as a dangerous reaction may occur.
  • When pre-dissolving always add product to water and not vice versa.
WaterLink Spin Unit

FREE Water Testing

All Swim can test your pool water free of charge!

Just bring a half litre sample to our Cardiff showroom. We'll use a photometer to analyse the current water balance and then give you a free report detailing any recommended remedial action.

The report details: Bromine/Chlorine, pH, Total Alkalinity, Calcium Hardness, Cyanuric acid, Iron and Copper.

Sage Pay, Visa, Mastercard, Maestro, Solo, American Express and Delta

Directors: A.J & J.L Veysey | Company registration no: 1061642 | VAT no: GB133 4078 90