Ribbon
Showroom Opening Update

Blue Horizons Granular Floc

Blue Horizons Granular Floc 2kg, Granular Pool Clarifier
Availability: 17 in stock
£8.00

Free UK Delivery Over £60
UK Mainland Only (Excludes Highlands)
Excludes Hot Tubs & Swimspas except Inflatables

All Prices include VAT

Blue Horizons Granular Floc sinks unwanted debris to the bottom of the pool creating clear sparkling water.

Application Instructions

  1. Maintain pH levels within the ideal range 7.2 - 7.6.  If the level is not in this range, adjust.
  2. Maintain total alkalinity within the ideal range of 80 - 150 mg/l(ppm). If the level is not in this range, adjust.
  3. Maintain chlorine levels within the ideal range 1 - 3mg/l (ppm).  If the level is not in this range, adjust.
  4. Pre-dissolve this product in a clean plastic container at a maximum rate of 100g of product per 2.2 gallons (10 litres) of clean warm water.  Stir well to ensure product is fully dissolved. Add the resulting solution evenly over the whole water surface with the filtration in recirculation mode (not filtration).
  5. Run filtration in recirculation mode for 30 minutes then turn pump off.
  6. Keep filtration off and leave the pool undisturbed for 12 - 24 hours to allow debris to settle to the bottom of the pool.
  7. Carefully vacuum settled debris to waste.
Water volumes
Litres Gallons Dose Rates
4,546 1,000 100g
11,365 2,500 250g
22,730 5,000 500g
45,460 10,000 1.0kg
68,190 15,000 1.5kg

 

General Precautions

Dosing

  • Wear eye and face protection and ensure granules are not blown back into your face.
  • Never mix with any other chemicals including cleaning products and chlorine products, as a dangerous reaction may occur.
  • When pre-dissolving product always add to water not vice versa.

Handling/Storage

  • Handle products in a well-ventilated area, preferably outdoors.
  • Wash hands after use.
  • Ensure chemicals do not become damp in storage - store in a cool dry place.
WaterLink Spin Unit

FREE Water Testing

All Swim can test your pool and hot tub water free of charge!

Just bring a half litre sample to our Cardiff showroom. We'll use a photometer to analyse the current water balance and then give you a free report detailing any recommended remedial action.

The report details: Bromine/Chlorine, pH, Total Alkalinity, Calcium Hardness, Cyanuric Acid, Iron, Phosphate and Copper.

Blue Horizons Granular Floc sinks unwanted debris to the bottom of the pool creating clear sparkling water.

Application Instructions

  1. Maintain pH levels within the ideal range 7.2 - 7.6.  If the level is not in this range, adjust.
  2. Maintain total alkalinity within the ideal range of 80 - 150 mg/l(ppm). If the level is not in this range, adjust.
  3. Maintain chlorine levels within the ideal range 1 - 3mg/l (ppm).  If the level is not in this range, adjust.
  4. Pre-dissolve this product in a clean plastic container at a maximum rate of 100g of product per 2.2 gallons (10 litres) of clean warm water.  Stir well to ensure product is fully dissolved. Add the resulting solution evenly over the whole water surface with the filtration in recirculation mode (not filtration).
  5. Run filtration in recirculation mode for 30 minutes then turn pump off.
  6. Keep filtration off and leave the pool undisturbed for 12 - 24 hours to allow debris to settle to the bottom of the pool.
  7. Carefully vacuum settled debris to waste.
Water volumes
Litres Gallons Dose Rates
4,546 1,000 100g
11,365 2,500 250g
22,730 5,000 500g
45,460 10,000 1.0kg
68,190 15,000 1.5kg

 

General Precautions

Dosing

  • Wear eye and face protection and ensure granules are not blown back into your face.
  • Never mix with any other chemicals including cleaning products and chlorine products, as a dangerous reaction may occur.
  • When pre-dissolving product always add to water not vice versa.

Handling/Storage

  • Handle products in a well-ventilated area, preferably outdoors.
  • Wash hands after use.
  • Ensure chemicals do not become damp in storage - store in a cool dry place.
WaterLink Spin Unit

FREE Water Testing

All Swim can test your pool and hot tub water free of charge!

Just bring a half litre sample to our Cardiff showroom. We'll use a photometer to analyse the current water balance and then give you a free report detailing any recommended remedial action.

The report details: Bromine/Chlorine, pH, Total Alkalinity, Calcium Hardness, Cyanuric Acid, Iron, Phosphate and Copper.

Overview

Blue Horizons Granular Floc sinks unwanted debris to the bottom of the pool creating clear sparkling water.

Application Instructions

  1. Maintain pH levels within the ideal range 7.2 - 7.6.  If the level is not in this range, adjust.
  2. Maintain total alkalinity within the ideal range of 80 - 150 mg/l(ppm). If the level is not in this range, adjust.
  3. Maintain chlorine levels within the ideal range 1 - 3mg/l (ppm).  If the level is not in this range, adjust.
  4. Pre-dissolve this product in a clean plastic container at a maximum rate of 100g of product per 2.2 gallons (10 litres) of clean warm water.  Stir well to ensure product is fully dissolved. Add the resulting solution evenly over the whole water surface with the filtration in recirculation mode (not filtration).
  5. Run filtration in recirculation mode for 30 minutes then turn pump off.
  6. Keep filtration off and leave the pool undisturbed for 12 - 24 hours to allow debris to settle to the bottom of the pool.
  7. Carefully vacuum settled debris to waste.
Water volumes
Litres Gallons Dose Rates
4,546 1,000 100g
11,365 2,500 250g
22,730 5,000 500g
45,460 10,000 1.0kg
68,190 15,000 1.5kg

 

General Precautions

Dosing

  • Wear eye and face protection and ensure granules are not blown back into your face.
  • Never mix with any other chemicals including cleaning products and chlorine products, as a dangerous reaction may occur.
  • When pre-dissolving product always add to water not vice versa.

Handling/Storage

  • Handle products in a well-ventilated area, preferably outdoors.
  • Wash hands after use.
  • Ensure chemicals do not become damp in storage - store in a cool dry place.
WaterLink Spin Unit

FREE Water Testing

All Swim can test your pool and hot tub water free of charge!

Just bring a half litre sample to our Cardiff showroom. We'll use a photometer to analyse the current water balance and then give you a free report detailing any recommended remedial action.

The report details: Bromine/Chlorine, pH, Total Alkalinity, Calcium Hardness, Cyanuric Acid, Iron, Phosphate and Copper.

Paypal SSL Secure - Globalsign Sage Pay, Visa, Mastercard, Maestro, Solo, American Express and Delta

 

Directors: A.J & J.L Veysey | Company registration no: 1061642 | VAT no: GB133 4078 90