Fi-Clor Tile and Liner Cleaner

Fi-Clor Tile and Liner Cleaner is a very effective gel specially formulated to remove dirt and scale from swimming pool waterlines.  The gel formula adheres better to vertical surfaces than liquid, making it easier to clean grease, suncream build up, scale and dirt from the waterline - which can become a breeding site for bacteria if left untreated.

Compatible with all swimming pool surface types, although a patch test on a small surface area is always recommended on first use.

Application Instructions:

• Before using this product, ensure the disinfectant test result is below 4mg/l (ppm) for free chlorine and below 9 mg/l for bromine (depending on which treatment you use).  DO NOT use until the readings are below these levels.
• Wear suitable eye protection and gloves.
• Wipe the product on using a cloth or sponge.
• Allow the product to mix in the pool water for a minimum of 5 minutes and a maximum of 1 hour.
• Rinse off with pool water.
• Rinse the cloth or sponge in fresh water after use.
• The diluted Tile and Liner cleaner does not react with pool sanitisers.
• For stubborn stains repeat the prcoess until desired results are achieved.

Precautions:

• Never spill water on this product as it can react violently with small volumes of water.
• Never pour directly on the water surface in the presence of bathers.
• Keep this product in a dry, well ventilated place at an average daily temperature not exceeding 35ºC.