All Swim PAK 2 Sodium Carbonate pH Plus (Raises pH)

Sodium Carbonate - Raises pH
Availability: In stock

£10.00

*

Free UK Delivery Over £60
UK Mainland Only (Excludes Highlands)
Excludes Hot Tubs & Swimspas except Inflatables

All Prices include VAT

Chemical Dosage Calculator

See how much All Swim PAK 2 Sodium Carbonate pH Plus (Raises pH) to use in our Chemical Dosage Calculator

The ideal pool pH levels are between 7.2 - 7.6, promoting bather comfort, optimum chemical efficiency and protection of pool plant equipment.  Test the pH of your pool water and if it is below 7.2, use All Swim Pak 2 to raise it.

Application Instructions

  1. Pre-dissolve the product in a clean plastic container at a maximum rate of 100g of product per 2.2 gallons (10lts) of clean warm water.  Stir well to ensure product is fully dissolved.  Carefully add the resulting solution to the pool whilst the pump(s) are turned "on", preferably near to the water inlets to aid distribution.
  2. After a minimum of 8 hours, recheck the pH level and if necessary repeat the treatment until the ideal pH is established. Please note a number of treatments may be required.
Water Volumes  
Litres Gallons Dose Rates
4,545 1,000 50g
9,090 2,000 100g
22,700 5,000 250g
45,450 10,000 500g
68,175 15,000 750g

 

General Precautions

Dosing

  • Wear eye and face protection and ensure granules are not blown back into your face.
  • Never mix with other chemicals including household cleaners as a dangerous reaction may occur.
  • When pre-dissolving always add product to water and not vice versa.

Handling/Storage

  • Handle products in a well ventilated area - preferably outdoors.
  • Wash hands after use.
  • Ensure chemicals do not become damp in storage - store in a cool dry place.

The ideal pool pH levels are between 7.2 - 7.6, promoting bather comfort, optimum chemical efficiency and protection of pool plant equipment.  Test the pH of your pool water and if it is below 7.2, use All Swim Pak 2 to raise it.

Application Instructions

  1. Pre-dissolve the product in a clean plastic container at a maximum rate of 100g of product per 2.2 gallons (10lts) of clean warm water.  Stir well to ensure product is fully dissolved.  Carefully add the resulting solution to the pool whilst the pump(s) are turned "on", preferably near to the water inlets to aid distribution.
  2. After a minimum of 8 hours, recheck the pH level and if necessary repeat the treatment until the ideal pH is established. Please note a number of treatments may be required.
Water Volumes  
Litres Gallons Dose Rates
4,545 1,000 50g
9,090 2,000 100g
22,700 5,000 250g
45,450 10,000 500g
68,175 15,000 750g

 

General Precautions

Dosing

  • Wear eye and face protection and ensure granules are not blown back into your face.
  • Never mix with other chemicals including household cleaners as a dangerous reaction may occur.
  • When pre-dissolving always add product to water and not vice versa.

Handling/Storage

  • Handle products in a well ventilated area - preferably outdoors.
  • Wash hands after use.
  • Ensure chemicals do not become damp in storage - store in a cool dry place.



Product tags
2024 All Swim Catalogue
A.J & J.L Veysey | Company registration no: 1061642 | VAT no: GB133 4078 90
All Swim Ltd, Units 3-5 Link Trade Park, Penarth Road, Cardiff CF11 8TQ

Modal