All Swim

Aquafinesse Spa Clean

AquaFinesse Spa Clean thoroughly removes debris and calcium deposits from pipework in hot tubs and spas. 1 x 53g Tablet.
Chemical Safety and Hazard Warning Tips
Availability: In stock

£12.99

Free UK Delivery Over £60
UK Mainland Only (Excludes Highlands)
Excludes Hot Tubs & Swimspas except Inflatables

All Prices include VAT

AquaFinesse Spa Clean is designed for use prior to draining your hot tub or spa to thoroughly remove debris and calcium from pipework.

Application Instructions:

  • Remove the filter and open all valves.  Raise chlorine level to between 3-5ppm prior to using Spa Clean.
  • Turn all jets and air valves on in the open position.  Dissolve the Aquafinesse Spa Clean Tablet by keeping it in the flow of a running jet or add it to the basket above the removed filter (or dissolve tablet in a bucket containing warm water)
  • Activate the pumps on full for 20 minutes 
  • Repeat the pump activation process at least 2-3 times during the deep cleaning process. The recommended treatment time is 6-12 hours or overnight.
  • Once the treatment is complete, activate the pumps prior to emptying the hot tub then thoroughly rinse with fresh water (do not use a cleaner)
  • Replace filters and refill with fresh tap water
  • Add chlorine shock treatment as normal  

Note:

If foam appears during the cleaning process, do not touch or inhale. Keep cover closed and keep out of the reach of children. 

AquaFinesse Spa Clean is designed for use prior to draining your hot tub or spa to thoroughly remove debris and calcium from pipework.

Application Instructions:

  • Remove the filter and open all valves.  Raise chlorine level to between 3-5ppm prior to using Spa Clean.
  • Turn all jets and air valves on in the open position.  Dissolve the Aquafinesse Spa Clean Tablet by keeping it in the flow of a running jet or add it to the basket above the removed filter (or dissolve tablet in a bucket containing warm water)
  • Activate the pumps on full for 20 minutes 
  • Repeat the pump activation process at least 2-3 times during the deep cleaning process. The recommended treatment time is 6-12 hours or overnight.
  • Once the treatment is complete, activate the pumps prior to emptying the hot tub then thoroughly rinse with fresh water (do not use a cleaner)
  • Replace filters and refill with fresh tap water
  • Add chlorine shock treatment as normal  

Note:

If foam appears during the cleaning process, do not touch or inhale. Keep cover closed and keep out of the reach of children. 




2022 All Swim Catalogue
A.J & J.L Veysey | Company registration no: 1061642 | VAT no: GB133 4078 90
All Swim Ltd, Units 3-5 Link Trade Park, Penarth Road, Cardiff CF11 8TQ