The perfect way to rejuvenate a pool is to renew the cover slats. (Re)Cover replacement slats are available in durable PVC or high quality, impact-resistant polycarbonate.
A (Re)Cover slat cover insulates, can heat and reduce maintenance plus its high quality ensures a long lifespan.
This is achieved by the extra UV-protection, hail resistance and best possible profile geometry. The various slats differ from one another not only in colour, but also in characteristics: insulation, heating, anti-algae.
Choosing the right slats depends on a number of factors: The location of the pool (indoor, outdoor, in the sun or in the shade), desired functionalities
(only insulation or also heating), budget and taste.
Replacement slats from (Re)Cover for automatic slatted pool covers come in either durable PVC or high-quality TRI-extrusion polycarbonate and in two different profiles:
Mast(eR) in both PVC and polycarbonate
Clean(eR) in polycarbonate only.
Depending on the desired properties (insulation, solar function and anti-algae) and the budget, the right choice can be made for the right profile
Start(eR) PVC are high quality insulating slats and are 60mm wide and are available in white or grey, they are a basic slat where insulation is the primary goal.
Polycarbonate slats have high impact resistance, tenacity and UV resistance, the tri-extrusion top layer makes it resistant against extremely high and extremely low temperatures. Especially suitable for outdoor pools.
The Mast(eR) Profile is the standard 60 mm profile in polycarbonate and in white and grey PVC. Height 14 mm and an uplift of 8.14 Kg/m². Perfect geometry
to replace any other profile. Because of its compact size, this slat is applicable in every situation, both in new buildings and renovations. It can be mounted above ground or under water.
The Clean(eR) Profile is also 60 mm wide and has an extra dark space to reduce the formation of algae in the hook connections. The Clean(eR) Profile in
Polycarbonate Solar is available in different colours. The Clean(eR) Profile is 15 mm high and therefore has a larger total roller diameter. Due to the extra closed space, the upward force is also higher: 9.6 Kg/m². Please take this into account when replacing the slats.