*WEEKEND SPECIAL OFFER*

10% OFF CHEMICALS, CLEANING & MAINTENANCE AS WELL AS 'NEW' PRODUCTS - Use Promo Code SWK24 at Checkout

~  Ends Midnight 14th April ~

 

*Discount does not apply to items already reduced, carriage charges or sodium hypochlorite

Aquasparkle Hot Tub Flush

Aquasparkle Hot Tub Flush, available in 500ml & 5 Litres. Spa Flush is a powerful liquid pipework cleaner for your hot tub.

It will remove scale, biofilm and other deposits in the plumbing system. Contains sulphuric acid.
Availability: In stock

£11.50

*

Free UK Delivery Over £60
UK Mainland Only (Excludes Highlands)
Excludes Hot Tubs & Swimspas except Inflatables

All Prices include VAT

Chemical Dosage Calculator

See how much Aquasparkle Hot Tub Flush to use in our Chemical Dosage Calculator

AquaSPArkle Hot Tub Flush has been especially formulated to remove build-up of soap and oil deposits in spa plumbing keeping your pipework clean and helping to prevent biofilm formation in your spa.

Application Instructions

  1. Hot Tub Flush should be used just prior to draining out hot tubs.  Dose directly into hot tub skimmer baskets whilst the pumps are turned on to assist product distribution.
  2. As a routine treatment, leave the pumps running for a minimum of 30 minutes after application and a further 30 minutes of standing water, prior to draining the hot tub water.

Daily Dose Rates
Water Volumes  
Litres Gallons Dose Rates
1,000 220 200ml
1,500 330 300ml
over 2,000 over 440 400ml



Alternatively, for a thorough cleaning where pipe cleaning procedures are overdue (i.e. more than a year without treatment), leave the pumps running for a minimum of 30 minutes after application and leave the treated hot tub water for 12 hours (i.e. overnight), prior to draining down and replacing hot tub water.


General
Dosing Precautions

  • Never mix with any other chemicals including cleaning products and chlorine products, as a dangerous reaction may occur.
  • Do not pour this product into a skimmer that contains, chlorine/bromine tablets or any other product.

Handling/Storage

  • Handle products in a well ventilated area - preferably outdoors.
  • Wash hands after use.
  • Ensure lid is replaced and sealed after use - store in a cool dry place.

AquaSPArkle Hot Tub Flush has been especially formulated to remove build-up of soap and oil deposits in spa plumbing keeping your pipework clean and helping to prevent biofilm formation in your spa.

Application Instructions

  1. Hot Tub Flush should be used just prior to draining out hot tubs.  Dose directly into hot tub skimmer baskets whilst the pumps are turned on to assist product distribution.
  2. As a routine treatment, leave the pumps running for a minimum of 30 minutes after application and a further 30 minutes of standing water, prior to draining the hot tub water.

Daily Dose Rates
Water Volumes  
Litres Gallons Dose Rates
1,000 220 200ml
1,500 330 300ml
over 2,000 over 440 400ml



Alternatively, for a thorough cleaning where pipe cleaning procedures are overdue (i.e. more than a year without treatment), leave the pumps running for a minimum of 30 minutes after application and leave the treated hot tub water for 12 hours (i.e. overnight), prior to draining down and replacing hot tub water.


General
Dosing Precautions

  • Never mix with any other chemicals including cleaning products and chlorine products, as a dangerous reaction may occur.
  • Do not pour this product into a skimmer that contains, chlorine/bromine tablets or any other product.

Handling/Storage

  • Handle products in a well ventilated area - preferably outdoors.
  • Wash hands after use.
  • Ensure lid is replaced and sealed after use - store in a cool dry place.



2024 All Swim Catalogue
A.J & J.L Veysey | Company registration no: 1061642 | VAT no: GB133 4078 90
All Swim Ltd, Units 3-5 Link Trade Park, Penarth Road, Cardiff CF11 8TQ

Modal