Aquasparkle Non-Chlorine Shock

Aquasparkle Non-Chlorine Shock - These fast dissolving chlorine free shock granules are ideal for shock dosing and regular oxidisation of pool and spa water.  They are suitable for pools and spas running on chlorine or bromine.

Application Instructions

1. Maintain pH levels within the ideal range 7.2 - 7.6.  If the level is not in this range, adjust.
2. Maintain free chlorine levels in the range pools: 1 - 3mg/l (ppm); spas 3 - 5mg/l (ppm). Maintain bromine levels in the range pools/spas 3 - 5mg/l (ppm).
3. Pre-dissolve this product in a clean plastic container at a maximum rate of 100g of product per 2.2 gallons (10 litres) of clean warm water. Stir well to ensure product is fully dissolved.  Add the resulting solution to the pool or spa whilst the pump(s) are turned 'on' preferably near the water inlets to aid distribution.
4. After shock treatment procedure, allow at least 30 minutes before bathing recommences.
   
   

General Precautions

Dosing

• Wear eye and face protection and ensure granules are not blown back into your face.
• Never mix with any other chemicals including cleaning products and chlorine products, as a dangerous reaction may occur.
• Do not pour this product into a pool skimmer basket containing chlorine tablets or any other product.
• When pre-dissolving product always add to water not vice versa.

Handling/Storage

• Handle products in a well-ventilated area, preferably outdoors.
• Wash hands after use.
• Ensure chemicals do not become damp in storage - store in a cool dry place.