Aquasparkle Spa Stabilised Chlorine Granules are ideal for daily dosing of your spa/hot tub, to produce free active chlorine which kills bacteria and other potentially harmful organisms. They are rapid dissolving and have minimal impact on the pH.

Application Instructions

1. Maintain pH level within the ideal range of 7.2 - 7.6. If the level is not in this range, adjust.
2. Maintain free chlorine residuals within the range 3 - 5mg/l (ppm) *Freshly filled new spa's or spa's left drained for a period of time require an initial start up dose of 50mg/l (ppm) of free chlorine circulated for a minimum of an hour.
3. This product may be applied directly to spa's where temperature exceed 20°C. If below this temperature or in doubt pre-dissolve this product in a clean plastic container at a maximum rate of 10g of product per 0.2 gallons (1lt) of water. Stir well to ensure product is fully dissolved. Carefully add the resulting solution to the spa whilst the pump(s) are turned 'on', preferably near the water inlets to aid distribution.
4. Repeat dose application if necessary to achieve levels in point 2 above. 
5.  Check the chlorine level is within the range 3 - 5mg/l (ppm) before bathing recommences.

Note: Oxidise the spa weekly or after heavy use with Aqua Sachet Spa Fusion

Dosing

• Wear protective clothing, gloves, eye/facial protection while handling.
• Never mix with any other chemicals including cleaning products and chlorine products, as a dangerous reaction may occur.

Handling/Storage

• Handle products in a well-ventilated area, preferably outdoors.
• Wash hands with soap after use.
• Store in a cool dry place out of reach from children.
• Ensure lid is replaced and sealed after use.
• Wash hands after use.
• If in eyes rinse cautiously for several minutes.
• If in contact with skin wash thoroughly with soap.