10% Discount Site Wide!* - use code AUTUMN24 at checkout 
*Discount does not apply to items already reduced, carriage charges or sodium hypochlorite

Aquasparkle pH Minus Sodium Bisulphate (Lowers pH)

pH Minus 1.5kg . For decreasing pH of spa water.
Chemical Safety and Hazard Warning Tips

£9.00

Free UK Delivery Over £60
UK Mainland Only (Excludes Highlands)
Excludes Hot Tubs & Swimspas except Inflatables

All Prices include VAT

Chemical Dosage Calculator

See how much Aquasparkle pH Minus Sodium Bisulphate (Lowers pH) to use in our Chemical Dosage Calculator

The ideal Spa pH levels are between 7.2 - 7.6, promoting bather comfort, optimum chemical efficiency and protection of spa plant equipment. Test the pH of your spa water and if it is above 7.6 use Aquasparkle Spa pH Minus to lower it.

Application Instructions

  1. Pre-dissolve the product in a clean plastic container at a maximum rate of 10g of product per 0.2 gallons (1lt) of clean warm water. Stir well to ensure product is fully dissolved.  Carefully add the resulting solution to the spa whilst the pump(s) are turned "on", preferably near to the water inlets to aid distribution.
  2. After a minimum of 30 minutes, recheck the pH level and if necessary repeat the treatment until the ideal pH is established. Please note a number of treatments may be required.
Water Volumes  
Litres Gallons Dose Rates
1,000 220 11g
1,500 330 17g

 

General Precautions

Dosing

  • Wear eye and face protection and ensure granules are not blown back into your face.
  • Never mix with other chemicals including household cleaners as a dangerous reaction may occur.
  • When pre-dissolving always add product to water and not vice versa.

Handling/Storage

  • Handle products in a well ventilated area - preferably outdoors.
  • Wash hands after use.
  • Ensure chemicals do not become damp in storage - store in a cool dry place.

The ideal Spa pH levels are between 7.2 - 7.6, promoting bather comfort, optimum chemical efficiency and protection of spa plant equipment. Test the pH of your spa water and if it is above 7.6 use Aquasparkle Spa pH Minus to lower it.

Application Instructions

  1. Pre-dissolve the product in a clean plastic container at a maximum rate of 10g of product per 0.2 gallons (1lt) of clean warm water. Stir well to ensure product is fully dissolved.  Carefully add the resulting solution to the spa whilst the pump(s) are turned "on", preferably near to the water inlets to aid distribution.
  2. After a minimum of 30 minutes, recheck the pH level and if necessary repeat the treatment until the ideal pH is established. Please note a number of treatments may be required.
Water Volumes  
Litres Gallons Dose Rates
1,000 220 11g
1,500 330 17g

 

General Precautions

Dosing

  • Wear eye and face protection and ensure granules are not blown back into your face.
  • Never mix with other chemicals including household cleaners as a dangerous reaction may occur.
  • When pre-dissolving always add product to water and not vice versa.

Handling/Storage

  • Handle products in a well ventilated area - preferably outdoors.
  • Wash hands after use.
  • Ensure chemicals do not become damp in storage - store in a cool dry place.



Product tags
2024 All Swim Catalogue
A.J & J.L Veysey | Company registration no: 1061642 | VAT no: GB133 4078 90
All Swim Ltd, Units 3-5 Link Trade Park, Penarth Road, Cardiff CF11 8TQ

Modal