Lo-Chlor No More Scale

Designed to reduce and soften scale formation on pool interiors and salt chlorinator cells, Lo-Chlor No More Scale will not contribute to phosphate build up (food for algae), unlike similar products.

General Instructions

1. No More Scale should be added at the start of the season during spring open up.

2. Calculate the required amount of No More Scale from the below dosage rates.

3. Ensure that the pump and filter are running as normal.

4. Mix the calculated dose in a clean bucket with water and evenly distribute around the pool. DO NOT add via the skimmer.

5. Filter as normal.

DOSE RATES:

INITIAL & FINAL:     500ml per 50,000 litres of pool water

MONTHLY MAINTENANCE:  100ml per 50,000 litres of pool water

Following the initial dose, continue to apply the product monthly to ensure constant protection against scale all year round.  To remove scale discolouration on waterline tiles, raise the water level above the waterline level and maintain for at least 3 weeks.  A final treatment is recommended when the pool is winterised or will be idle for a long period of time. The main causes of scale formation are usually high levels of calcium and poor water balance, metal stains form due to incorrectly balanced water.