What Is It?

Lo-Chlor Starver is a unique, patented, liquid phosphate remover.

Who Needs It?

A pool owner who has an above than satisfactory level of phosphate in their pool.

What Does It Do?

• Removes phosphate, the main food for algae, from the water.
• Allows other chemicals to work far more effectively.

What Advantages Does It Have Over Other Similar Products?

• New, improved, extra strength formulation.
• Guaranteed not to make the water cloudy when used as directed.
• Guaranteed not to clog your filter.
• Uniquely designed to be completely retained by the filter for maximum efficiency.
• Loading the filter results in sparkling clear water and much quicker phosphate removal.
• It may be used in all types of pool finishes.
• Compatible with all recognised sanitisers and other pool additives.
• Effective over a wide pH range.
• Patented Formula.

Dose Rate

Initial Dose : For a phosphate reading up to 1ppm add Starver at a rate of 500ml per 50,000 Litres of water every 2-3 days. For a reading greater than 1ppm but below 2ppm add 1 Litre of Starver per 50,000 Litres of water every 2-3 days

Maintenance Dose : For a phosphate reading between 0-0.2ppm a regular maintenance dose of 500ml per 50,000 Litres of water and is required every 2 weeks.

General Instructions

CAUTION: If algae is present this must be treated with a Lo-Chlor algaecide prior to starting the application of Starver

1. Backwash the filter, check filter pressure and adjust pH to 7.2 - 7.4
2. Use a reliable phosphate test kit to establish the phosphate levels in your pool water.
3. Shake the container for a minimum of 30 seconds and add the required dose (Listed Above) slowly into the skimmer with the pump and filter running.
4. Check filter Pressure after 48 - 72 hours. Backwash the filter and add a maintenance dose.