The HeatForm insulated panel system is a simple, eco-friendly solution to create an above-ground swimming pool.
Made in Devon, HeatForm features a specialist insulation manufactured from 100% recycled plastic PET bottles - which greatly reduces pool water heating costs compared to traditional DIY pools.
Please note that this includes HeatForm Panels and the surrounding steelwork only - a separate All Swim DIY pool kit is required for the liner and pool shell equipment.
Lead time from order approximately 4 weeks.
The HeatForm Insulated panel pool system is an affordable, simplistic design of swimming pool construction. Made in the UK, HeatForm features a special type of insulation which is made from 100% recycled plastic PET bottles - greatly reducing the energy consumption of the pool when compared to the costs of a traditional swimming pool.
In terms of insulation, the lower the U-value the better when it comes to energy consumption - a standard concrete block has a U-value of 0.18 compared to HeatForm's U-value of 0.034. An 80mm core of recycled insulation is sandwiched between a toughened fibreglass exterior then each of the panels bolt together to form the basic pool shell. The HeatForm panel system is both easy and quick to install and is adjustable within half metre increments at varying depths.
HeatForm panels comprise of an 80mm core of recycled insulation sandwiched between a toughened fibreglass exterior. Each of the panels then bolt together to form the basic pool shell. This flexible system is easy and quick to install and can be adjusted within half metre increments at varying depths.
What Is Included?
HeatForm above-ground panel pools comprise of the HeatForm Panels and the surrounding steel work and can be installed either indoors or outdoors (if you wish to install your pool in-ground, please refer to the HeatForm In-Ground Panels section).
Why Choose HeatForm?
- Reduces heating costs by up to 50%
- Modular 90mm panel system that can be designed to suit any garden size
- Flat clean smooth panels that do not need rendering and are easily built parallel and square
- No experience required in building blockwork
- No Rendering skills to make pool walls straight
- Walls installed in 1 day for up to 12m x 6m Pool
- No weather delays - too cold for cement or concrete to be poured
- Walls pre-insulated with closed cell insulation to ensure maximum efficiency - U-value of 0.034 W/(mØK)
- Recess knock outs for easy placement of pool fittings
- Two panel wall depths – 1.2m & 1.5m
- Reduced garden disruption compared to block built pool
- Speed of build typically 2-3 weeks compared to block pool 4-5 weeks
- Not weather dependant – panels can be bolted together in inclement weather conditions
- UK made
- Helping reduce global plastic waste with the insulated foam core made from 100% post-consumer (recycled) PET.
All Swim Pool Kit Size
|
HeatForm Panel Actual Pool Size
|
5.5 x 2.7 x 1.22m 18’ x 9’ x 4’
|
5.5m x 2.5m
|
6.1 x 3.0 x 1.22m 20’ x 10’ x 4’
|
6m x 3m
|
7.32 x 3.7 x 1.22m 24’ x 12’ x 4’
|
7.5m x 3.5m
|
7.32 x 3.7 x 1 - 1.62m 24’ x 12’ x 3’4” - 5’3”
|
7.5m x 4m
|
8.5 x 4.3 x 1 - 1.8m 28’ x 14’ x 3’4” - 6’0”
|
8.5m x 4.5m
|
9.1 x 4.3 x 1 - 1.8m 30’ x 14’ x 3’4” - 6’0”
|
9m x 4.5m
|
9.8 x 4.9 x 1 - 2.1m 32’ x 16’ x 3’4” - 6’9”
|
10m x 5m
|
11.6 x 4.9 x 1 - 2.3m 38’ x 16’ x 3’4” - 7’6”
|
11.5m x 5m
|
12.2 x 6.1 x 1 - 2.3m 40’ x 20’ x 3’4” - 7’6”
|
12m x 6m
|