Ribbon

HeatForm Panels

The HeatForm insulated panel system is an eco-friendly and simple solution to create your own swimming pool.

UK made, HeatForm features a specialist insulation manufactured from 100% recycled plastic PET bottles - reducing pool water heating costs compared to traditional DIY pools.

Combine with an All Swim DIY pool kit for liner and pool shell equipment.

Lead time from order approximately 4 weeks.

Free shipping
£8,870.00
*

Free UK Delivery Over £60
UK Mainland Only (Excludes Highlands)
Excludes Hot Tubs & Swimspas except Inflatables

All Prices include VAT

The HeatForm Insulated panel pool system is an affordable, simplistic design of swimming pool construction. Made in Devon, HeatForm features a special type of insulation made from 100% recycled plastic PET bottles, which can reduce the energy consumption of the pool in comparison to the costs of a traditional concrete pool.

In terms of insulation, the lower the U-value the better when it comes to energy consumption - a standard concrete block has a U-value of 0.18 compared to HeatForm's U-value of 0.034. An 80mm core of recycled insulation is sandwiched between a toughened fibreglass exterior then each of the panels bolt together to form the basic pool shell. The HeatForm panel system is both easy and quick to install and is adjustable within half metre increments at varying depths.

The HeatForm panels are an 80mm core of recycled insulation sandwiched between a toughened fibreglass exterior. Each of the panels bolt together to form a basic pool shell. This flexible system is easy and quick to install and can be adjusted within half metre increments at varying depths. HeatForm panel pools can be installed either in-ground or above-ground, indoors or outdoors. 

Why Choose HeatForm?

  1. Reduces heating costs by up to 50%
  2. Modular system that can be designed to suit any garden size
  3. Flat clean smooth panels that do not need rendering and are easily built parallel and square
  4. No experience required in building blockwork
  5. No Rendering skills to make pool walls straight
  6. Walls installed in 1 day for up to 12m x 6m Pool
  7. No weather delays  - too cold for cement or concrete to be poured
  8. Walls pre-insulated with closed cell insulation to ensure maximum efficiency  - U-value of 0.034 W/(mØK)
  9. Recess knock outs for easy placement of pool fittings
  10. Two panel wall depths – 1.2m & 1.5m
  11. Reduced garden disruption compared to block built pool
  12. Speed of build typically 2-3 weeks compared to block pool 4-5 weeks
  13. Not weather dependant – panels can be bolted together in inclement weather conditions
  14. UK made
  15. Helping reduce global plastic waste with the insulated foam core made from 100% post-consumer (recycled) PET.

All Swim Pool Kit Size

HeatForm Panel Actual Pool Size

5.5 x 2.7 x 1.22m               18’ x 9’ x 4’

5.5m x 2.5m

6.1 x 3.0 x 1.22m               20’ x 10’ x 4’

6m x 3m

7.32 x 3.7 x 1.22m             24’ x 12’ x 4’

7.5m x 3.5m

7.32 x 3.7 x 1 - 1.62m        24’ x 12’ x 3’4” - 5’3”

7.5m x 4m

8.5 x 4.3 x 1 - 1.8m           28’ x 14’ x 3’4” - 6’0”

8.5m x 4.5m

9.1 x 4.3 x 1 - 1.8m           30’ x 14’ x 3’4” - 6’0”

9m x 4.5m

9.8 x 4.9 x 1 - 2.1m           32’ x 16’ x 3’4” - 6’9”

10m x 5m

11.6 x 4.9 x 1 - 2.3m         38’ x 16’ x 3’4” - 7’6”

11.5m x 5m

12.2 x 6.1 x 1 - 2.3m         40’ x 20’ x 3’4” - 7’6”

12m x 6m

The HeatForm Insulated panel pool system is an affordable, simplistic design of swimming pool construction. Made in Devon, HeatForm features a special type of insulation made from 100% recycled plastic PET bottles, which can reduce the energy consumption of the pool in comparison to the costs of a traditional concrete pool.

In terms of insulation, the lower the U-value the better when it comes to energy consumption - a standard concrete block has a U-value of 0.18 compared to HeatForm's U-value of 0.034. An 80mm core of recycled insulation is sandwiched between a toughened fibreglass exterior then each of the panels bolt together to form the basic pool shell. The HeatForm panel system is both easy and quick to install and is adjustable within half metre increments at varying depths.

The HeatForm panels are an 80mm core of recycled insulation sandwiched between a toughened fibreglass exterior. Each of the panels bolt together to form a basic pool shell. This flexible system is easy and quick to install and can be adjusted within half metre increments at varying depths. HeatForm panel pools can be installed either in-ground or above-ground, indoors or outdoors. 

Why Choose HeatForm?

  1. Reduces heating costs by up to 50%
  2. Modular system that can be designed to suit any garden size
  3. Flat clean smooth panels that do not need rendering and are easily built parallel and square
  4. No experience required in building blockwork
  5. No Rendering skills to make pool walls straight
  6. Walls installed in 1 day for up to 12m x 6m Pool
  7. No weather delays  - too cold for cement or concrete to be poured
  8. Walls pre-insulated with closed cell insulation to ensure maximum efficiency  - U-value of 0.034 W/(mØK)
  9. Recess knock outs for easy placement of pool fittings
  10. Two panel wall depths – 1.2m & 1.5m
  11. Reduced garden disruption compared to block built pool
  12. Speed of build typically 2-3 weeks compared to block pool 4-5 weeks
  13. Not weather dependant – panels can be bolted together in inclement weather conditions
  14. UK made
  15. Helping reduce global plastic waste with the insulated foam core made from 100% post-consumer (recycled) PET.

All Swim Pool Kit Size

HeatForm Panel Actual Pool Size

5.5 x 2.7 x 1.22m               18’ x 9’ x 4’

5.5m x 2.5m

6.1 x 3.0 x 1.22m               20’ x 10’ x 4’

6m x 3m

7.32 x 3.7 x 1.22m             24’ x 12’ x 4’

7.5m x 3.5m

7.32 x 3.7 x 1 - 1.62m        24’ x 12’ x 3’4” - 5’3”

7.5m x 4m

8.5 x 4.3 x 1 - 1.8m           28’ x 14’ x 3’4” - 6’0”

8.5m x 4.5m

9.1 x 4.3 x 1 - 1.8m           30’ x 14’ x 3’4” - 6’0”

9m x 4.5m

9.8 x 4.9 x 1 - 2.1m           32’ x 16’ x 3’4” - 6’9”

10m x 5m

11.6 x 4.9 x 1 - 2.3m         38’ x 16’ x 3’4” - 7’6”

11.5m x 5m

12.2 x 6.1 x 1 - 2.3m         40’ x 20’ x 3’4” - 7’6”

12m x 6m

 

HeatForm - The Insulated panel pool that doesn't cost the Earth

 

 

HeatForm Inground build

 

 

HeatForm Panel Pools Heat Loss

 

Overview

The HeatForm Insulated panel pool system is an affordable, simplistic design of swimming pool construction. Made in Devon, HeatForm features a special type of insulation made from 100% recycled plastic PET bottles, which can reduce the energy consumption of the pool in comparison to the costs of a traditional concrete pool.

In terms of insulation, the lower the U-value the better when it comes to energy consumption - a standard concrete block has a U-value of 0.18 compared to HeatForm's U-value of 0.034. An 80mm core of recycled insulation is sandwiched between a toughened fibreglass exterior then each of the panels bolt together to form the basic pool shell. The HeatForm panel system is both easy and quick to install and is adjustable within half metre increments at varying depths.

The HeatForm panels are an 80mm core of recycled insulation sandwiched between a toughened fibreglass exterior. Each of the panels bolt together to form a basic pool shell. This flexible system is easy and quick to install and can be adjusted within half metre increments at varying depths. HeatForm panel pools can be installed either in-ground or above-ground, indoors or outdoors. 

Why Choose HeatForm?

  1. Reduces heating costs by up to 50%
  2. Modular system that can be designed to suit any garden size
  3. Flat clean smooth panels that do not need rendering and are easily built parallel and square
  4. No experience required in building blockwork
  5. No Rendering skills to make pool walls straight
  6. Walls installed in 1 day for up to 12m x 6m Pool
  7. No weather delays  - too cold for cement or concrete to be poured
  8. Walls pre-insulated with closed cell insulation to ensure maximum efficiency  - U-value of 0.034 W/(mØK)
  9. Recess knock outs for easy placement of pool fittings
  10. Two panel wall depths – 1.2m & 1.5m
  11. Reduced garden disruption compared to block built pool
  12. Speed of build typically 2-3 weeks compared to block pool 4-5 weeks
  13. Not weather dependant – panels can be bolted together in inclement weather conditions
  14. UK made
  15. Helping reduce global plastic waste with the insulated foam core made from 100% post-consumer (recycled) PET.

All Swim Pool Kit Size

HeatForm Panel Actual Pool Size

5.5 x 2.7 x 1.22m               18’ x 9’ x 4’

5.5m x 2.5m

6.1 x 3.0 x 1.22m               20’ x 10’ x 4’

6m x 3m

7.32 x 3.7 x 1.22m             24’ x 12’ x 4’

7.5m x 3.5m

7.32 x 3.7 x 1 - 1.62m        24’ x 12’ x 3’4” - 5’3”

7.5m x 4m

8.5 x 4.3 x 1 - 1.8m           28’ x 14’ x 3’4” - 6’0”

8.5m x 4.5m

9.1 x 4.3 x 1 - 1.8m           30’ x 14’ x 3’4” - 6’0”

9m x 4.5m

9.8 x 4.9 x 1 - 2.1m           32’ x 16’ x 3’4” - 6’9”

10m x 5m

11.6 x 4.9 x 1 - 2.3m         38’ x 16’ x 3’4” - 7’6”

11.5m x 5m

12.2 x 6.1 x 1 - 2.3m         40’ x 20’ x 3’4” - 7’6”

12m x 6m

Heatform Video

 

HeatForm - The Insulated panel pool that doesn't cost the Earth

 

 

HeatForm Inground build

 

 

HeatForm Panel Pools Heat Loss

 

Paypal SSL Secure - Globalsign Sage Pay, Visa, Mastercard, Maestro, Solo, American Express and Delta

 

Directors: A.J & J.L Veysey | Company registration no: 1061642 | VAT no: GB133 4078 90