Ribbon

10kg Shock With FREE Aquasparkle Tablets (worth £12.50)

These non stabilised chlorine granules are ideal for shock dosing or regular oxidisation of swimming pool water. However they may be used for routine disinfection. Calcium Hypochlorite with 65% available chlorine.
View Chemical Safety Sheets

Download Product Specification PDF

Availability: In stock
£51.00

Free UK Delivery Over £60
UK Mainland Only (Excludes Highlands)
Excludes Hot Tubs & Swimspas except Inflatables

All Prices include VAT

All Swim Shock Chlorine - These non stabilised chlorine granules are ideal for shock dosing or regular oxidisation of swimming pool water. However, they may also be used for routine disinfection.

Application Instructions for Shock Chlorine Granules

  1. Maintain pH levels within the ideal range 7.2 - 7.6. If the level is not in the range, adjust.
  2. Maintain free chlorine residuals routinely in the 1 - 3 mg/l (ppm) range. Shock or oxidising procedures are recommended either weekly or fortnightly with a maximum of 10 mg/l (ppm) for full shock treatment.
  3. Pre-dissolve the shock chlorine (non stabilised granules) in a clean plastic container at a maximum rate of 100g of product per 2.2 gallons (10 litres) of water. Stir well to ensure shock is fully dissolved. Add the resulting solution to the pool whilst the pump(s) are turned 'on' preferably near the water inlets to aid distribution.
  4. Repeat the dose / application if necessary to achieve the desired level.
  5. After using shock granules, pool water may become temporarily cloudy, so keep the filtration pump running until it clears.
  6. After shock treatment procedures allow the chlorine to drop below 5 ppm before bathing recommences, and in any event wait for at least 30 minutes before bathing recommences.
Daily Dose Rates
Water volumes To increase chlorine level by
Litres Gallons 1ppm 5ppm 10ppm
4,545 1,000 7g 35g 70g
11,360 2,500 17g 88g 175g
22,725 5,000 35g 175g 350g
69,175 15,000 105g 525g 1050g

 

General Precautions

Dosing

  •  Wear eye and face protection and ensure granules are not blown back into your face.
  •  Never mix with any other chemicals including cleaning products and chlorine products, as a dangerous reaction may occur.
  •  Do not pour this product into a pool skimmer basket containing chlorine tablets or any other product.
  •  When pre-dissolving product always add to water not vice versa. 

Handling/Storage

  •  Handle products in a well-ventilated area, preferably outdoors.
  •  Wash hands after use.
  •  Ensure chemicals do not become damp in storage - store in a cool dry place.

 

Aqua Sparkle Tablets - To clarify and brighten pool water

Clarity problems may occur when undissloved solids are present in pool water, either due to heavy use, chemical imbalances, or after algae destruction. Aqua Sparkle Tablets will assist your sand filter to remove small suspended solids that otherwise may prove difficult to remove.

NOTE: Aqua Sparkle Tablets are not recommended for use with cartridge(s) or DE Filters.

Application instructions

  1. Maintain pH and alkalinity levels within the ideal ranges of 7.2-7.6 and 80-150 (mg/l) respectively. Adjust these to the required range if necessary before using Aqua Sparkle Tablets.
  2. Backwash the filter prior to application.
  3. Dose via a clean and empty skimmer basket or pump strainer basket, ensuring that the filtration system remains "on" for 24 hours.
  4. Dose at the rate of 1 tablet per 40,900 litres (9000 gallons) or the nearest tablet dose if greater.

General Precautions

Never mix with other chemicals in the skimmer basket, including household cleaners etc. as a dangerous reaction my occur.

WaterLink Spin Unit

FREE Water Testing

All Swim can test your pool and hot tub water free of charge!

Just bring a half litre sample to our Cardiff showroom. We'll use a photometer to analyse the current water balance and then give you a free report detailing any recommended remedial action.

The report details: Bromine/Chlorine, pH, Total Alkalinity, Calcium Hardness, Cyanuric Acid, Iron and Copper.

All Swim Shock Chlorine - These non stabilised chlorine granules are ideal for shock dosing or regular oxidisation of swimming pool water. However, they may also be used for routine disinfection.

Application Instructions for Shock Chlorine Granules

  1. Maintain pH levels within the ideal range 7.2 - 7.6. If the level is not in the range, adjust.
  2. Maintain free chlorine residuals routinely in the 1 - 3 mg/l (ppm) range. Shock or oxidising procedures are recommended either weekly or fortnightly with a maximum of 10 mg/l (ppm) for full shock treatment.
  3. Pre-dissolve the shock chlorine (non stabilised granules) in a clean plastic container at a maximum rate of 100g of product per 2.2 gallons (10 litres) of water. Stir well to ensure shock is fully dissolved. Add the resulting solution to the pool whilst the pump(s) are turned 'on' preferably near the water inlets to aid distribution.
  4. Repeat the dose / application if necessary to achieve the desired level.
  5. After using shock granules, pool water may become temporarily cloudy, so keep the filtration pump running until it clears.
  6. After shock treatment procedures allow the chlorine to drop below 5 ppm before bathing recommences, and in any event wait for at least 30 minutes before bathing recommences.
Daily Dose Rates
Water volumes To increase chlorine level by
Litres Gallons 1ppm 5ppm 10ppm
4,545 1,000 7g 35g 70g
11,360 2,500 17g 88g 175g
22,725 5,000 35g 175g 350g
69,175 15,000 105g 525g 1050g

 

General Precautions

Dosing

  •  Wear eye and face protection and ensure granules are not blown back into your face.
  •  Never mix with any other chemicals including cleaning products and chlorine products, as a dangerous reaction may occur.
  •  Do not pour this product into a pool skimmer basket containing chlorine tablets or any other product.
  •  When pre-dissolving product always add to water not vice versa. 

Handling/Storage

  •  Handle products in a well-ventilated area, preferably outdoors.
  •  Wash hands after use.
  •  Ensure chemicals do not become damp in storage - store in a cool dry place.

 

Aqua Sparkle Tablets - To clarify and brighten pool water

Clarity problems may occur when undissloved solids are present in pool water, either due to heavy use, chemical imbalances, or after algae destruction. Aqua Sparkle Tablets will assist your sand filter to remove small suspended solids that otherwise may prove difficult to remove.

NOTE: Aqua Sparkle Tablets are not recommended for use with cartridge(s) or DE Filters.

Application instructions

  1. Maintain pH and alkalinity levels within the ideal ranges of 7.2-7.6 and 80-150 (mg/l) respectively. Adjust these to the required range if necessary before using Aqua Sparkle Tablets.
  2. Backwash the filter prior to application.
  3. Dose via a clean and empty skimmer basket or pump strainer basket, ensuring that the filtration system remains "on" for 24 hours.
  4. Dose at the rate of 1 tablet per 40,900 litres (9000 gallons) or the nearest tablet dose if greater.

General Precautions

Never mix with other chemicals in the skimmer basket, including household cleaners etc. as a dangerous reaction my occur.

WaterLink Spin Unit

FREE Water Testing

All Swim can test your pool and hot tub water free of charge!

Just bring a half litre sample to our Cardiff showroom. We'll use a photometer to analyse the current water balance and then give you a free report detailing any recommended remedial action.

The report details: Bromine/Chlorine, pH, Total Alkalinity, Calcium Hardness, Cyanuric Acid, Iron and Copper.

Overview

All Swim Shock Chlorine - These non stabilised chlorine granules are ideal for shock dosing or regular oxidisation of swimming pool water. However, they may also be used for routine disinfection.

Application Instructions for Shock Chlorine Granules

  1. Maintain pH levels within the ideal range 7.2 - 7.6. If the level is not in the range, adjust.
  2. Maintain free chlorine residuals routinely in the 1 - 3 mg/l (ppm) range. Shock or oxidising procedures are recommended either weekly or fortnightly with a maximum of 10 mg/l (ppm) for full shock treatment.
  3. Pre-dissolve the shock chlorine (non stabilised granules) in a clean plastic container at a maximum rate of 100g of product per 2.2 gallons (10 litres) of water. Stir well to ensure shock is fully dissolved. Add the resulting solution to the pool whilst the pump(s) are turned 'on' preferably near the water inlets to aid distribution.
  4. Repeat the dose / application if necessary to achieve the desired level.
  5. After using shock granules, pool water may become temporarily cloudy, so keep the filtration pump running until it clears.
  6. After shock treatment procedures allow the chlorine to drop below 5 ppm before bathing recommences, and in any event wait for at least 30 minutes before bathing recommences.
Daily Dose Rates
Water volumes To increase chlorine level by
Litres Gallons 1ppm 5ppm 10ppm
4,545 1,000 7g 35g 70g
11,360 2,500 17g 88g 175g
22,725 5,000 35g 175g 350g
69,175 15,000 105g 525g 1050g

 

General Precautions

Dosing

  •  Wear eye and face protection and ensure granules are not blown back into your face.
  •  Never mix with any other chemicals including cleaning products and chlorine products, as a dangerous reaction may occur.
  •  Do not pour this product into a pool skimmer basket containing chlorine tablets or any other product.
  •  When pre-dissolving product always add to water not vice versa. 

Handling/Storage

  •  Handle products in a well-ventilated area, preferably outdoors.
  •  Wash hands after use.
  •  Ensure chemicals do not become damp in storage - store in a cool dry place.

 

Aqua Sparkle Tablets - To clarify and brighten pool water

Clarity problems may occur when undissloved solids are present in pool water, either due to heavy use, chemical imbalances, or after algae destruction. Aqua Sparkle Tablets will assist your sand filter to remove small suspended solids that otherwise may prove difficult to remove.

NOTE: Aqua Sparkle Tablets are not recommended for use with cartridge(s) or DE Filters.

Application instructions

  1. Maintain pH and alkalinity levels within the ideal ranges of 7.2-7.6 and 80-150 (mg/l) respectively. Adjust these to the required range if necessary before using Aqua Sparkle Tablets.
  2. Backwash the filter prior to application.
  3. Dose via a clean and empty skimmer basket or pump strainer basket, ensuring that the filtration system remains "on" for 24 hours.
  4. Dose at the rate of 1 tablet per 40,900 litres (9000 gallons) or the nearest tablet dose if greater.

General Precautions

Never mix with other chemicals in the skimmer basket, including household cleaners etc. as a dangerous reaction my occur.

WaterLink Spin Unit

FREE Water Testing

All Swim can test your pool and hot tub water free of charge!

Just bring a half litre sample to our Cardiff showroom. We'll use a photometer to analyse the current water balance and then give you a free report detailing any recommended remedial action.

The report details: Bromine/Chlorine, pH, Total Alkalinity, Calcium Hardness, Cyanuric Acid, Iron and Copper.

SSL Secure - Globalsign Sage Pay, Visa, Mastercard, Maestro, Solo, American Express and Delta

 

Directors: A.J & J.L Veysey | Company registration no: 1061642 | VAT no: GB133 4078 90